Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for BlackVue DR900S-1CH
Summary of Contents for BlackVue DR900S-1CH
- Page 1 DR900S-1CH Manual ENGLISH...
-
Page 2: Table Of Contents
Checking the displayed time & GPS data .................. 21 Formatting the microSD card ..........42 Real-time streaming video (Live View) ..............22 Formatting the card in the BlackVue ..............42 Managing videos .....................23 Managing videos in BLACKVUE WI-FI ..................23 Format using BlackVue Viewer (Windows) ............42 Copy to Internal Memory ............................. - Page 3 Login credentials ..........................63 About the Cloud Service ...........84 Wi-Fi auto turn on & off ......................... 63 Cloud settings ......................64 Connect to BLACKVUE CLOUD (Optional) ......84 Enable Cloud service ........................64 Optional accessories ..........89 Cloud service hotspot settings ....................65 Parking mode hardwiring kit (Optional) ......
- Page 4 Changing / resetting direct Wi-Fi SSID and password ..91 On-device Wi-Fi SSID and password reset ............91 Change Wi-Fi SSID and password over the Cloud ..........92 Change the Wi-Fi password using BlackVue Viewer (Windows or Mac) ..94 Product specifications ..........95 Recording time ............97 Disposal and recycling information ......98...
-
Page 5: Introduction
To improve the performance of the product, the contents of this manual are subject to change without prior notice. Note y A formatted microSD card is provided with the BlackVue dashcam when you purchase the product. Insert the microSD card in the dashcam and power it up. The microSD card will be initialized. -
Page 6: Important Safety Information
Do not operate the product with wet hands. Doing so may cause electric shock. y Do not install the product in an environment with high humidity, or combustible gases or liquids. Doing so may cause an explosion and/or fire. BLACKVUE... - Page 7 Plug in the power cord firmly so that it cannot easily be disconnected. Failure to do so may cause fire. y Do not cover the product with any material. Doing so may cause external deformation of the product or fire. Use the product and peripherals in a well-ventilated location. DR900S-1CH...
- Page 8 It is recommended that you install the software and firmware from the BlackVue downloads page (www.blackvue.com). y It is recommended that you remove the power cord if the product (BlackVue dashcam/Parking Mode Hardwiring Kit) is not used for an extended period of time.
-
Page 9: Overview
The illustrations in this manual may differ from the product. y To improve the performance of the product, the contents of this manual are subject to change without prior notice. y For more information about the package components and accessories, visit the BlackVue website (www.blackvue.com). DR900S-1CH... -
Page 10: At A Glance
At a glance The following diagrams explain each part of the BlackVue dashcam. 118.5 mm Lock button Camera lens Front security LED Mounting bracket : Blinks slowly during normal mode and parking mode motion detection standby. : Blinks quickly when (i) an event is being recorded (impact detected), (ii) manual recording has started, or (iii) motion is detected in parking mode. - Page 11 – Press once to turn on/off Wi-Fi. – Press and hold for 5 seconds and once voice instructions start, release the button. Then press once again to reset the Wi-Fi SSID and password or press and hold for 5 seconds to format the microSD card. DR900S-1CH...
-
Page 12: Removing And Inserting The Dashcam
To remove the dashcam from its bracket, press the LOCK button and pull the dashcam out of the mounting bracket. y To insert the dashcam into its bracket, push the dashcam into the mounting bracket until it "clicks" in. BLACKVUE... -
Page 13: Installation
Installation Installing the BlackVue dashcam Install the BlackVue dashcam behind the rear view mirror. Remove any foreign matter and clean and dry the windshield before installation. Warning y Do not install the product in a location where it can obstruct the driver's field of vision. - Page 14 6:4 road to background ratio. Plug the power cord into the cigarette lighter socket and the dashcam. Use the pry tool to lift the edges of the windshield trim/molding and tuck in the power cord. BLACKVUE...
- Page 15 Turn on the engine. The BlackVue dashcam will power up and start recording. Video files are stored on the microSD card. When the microSD card fills up, the newest video files will start to replace the oldest video files (called loop recording) – so you will always have the most recent video files.
-
Page 16: Playing And Managing Videos
Playing and managing video files using your smartphone (Android/iOS) Opening video files Search for the BlackVue app in the Google Play Store or Apple App Store and install it on your smartphone. “Pair” your smartphone with the BlackVue dashcam via direct Wi-Fi: a. - Page 17 Choose your BlackVue dashcam from the network list. The dashcam’s default SSID begins with its model number (e.g. BlackVue****-******). d. Enter the password and tap join. * The default Wi-Fi SSID and password are printed on the dashcam's label.
-
Page 18: Blackvue Wi-Fi Screen Composition
BLACKVUE WI-FI screen composition Copy to Internal Memory BlackVue SSID Firmware settings File type filter buttons Video list Video file pop-up menu Live View Refresh video list Note y All images shown are for illustration purposes only. Actual app may differ from images shown. -
Page 19: Playing Video
If proximity sensor is set as a manual recording trigger in the firmware settings, touching or waving a Manual finger within 20mm of the sensor will turn on manual recording. Tap the car icon to load the thumbnail of a recording. DR900S-1CH... - Page 20 (Normal, Event, Parking and Manual). The filter button displays both E (Event) and I (Impact event while parked) recordings. y The dashcam requires a constant power source to record in parking mode. See "Optional accessories" on page 89 for more information. BLACKVUE...
-
Page 21: Checking The Displayed Time & Gps Data
Video file Date, Time & Speed Model name Portrait and landscape display The vehicle's speed is displayed in the lower-left corner of the video. Rotate your smartphone or press the rotate button to switch between portrait and landscape display modes. DR900S-1CH... -
Page 22: Real-Time Streaming Video (Live View)
You can view in real-time the video currently being recorded by connecting your smartphone to the dashcam via direct Wi-Fi. Go to your smartphone's Settings > Wi-Fi and connect to your dashcam. Open the BlackVue app. Select BLACKVUE WI-FI and tap the button. -
Page 23: Managing Videos
Managing videos Managing videos in BLACKVUE WI-FI You can manage the recorded videos using the BlackVue app. Note y When the microSD card fills up, the newest video files will start to replace the oldest video files (called loop recording) – so you will always have the most recent video files. -
Page 24: Managing Videos In Internal Memory
Managing videos in INTERNAL MEMORY Open the BlackVue app and select INTERNAL MEMORY. Tap to see file options. You can delete, copy or move files, change the name of files and share files. BLACKVUE... -
Page 25: Deleting Videos
Go to another folder and tap to paste the selected files there. To copy individual files, tap next to the video you want to copy. Select Copy. Go to another folder and tap to paste the file there. DR900S-1CH... -
Page 26: Moving Videos
Uploading, sharing or emailing a video Tap next to the video you want to share. Select Share file. Choose the app you want to share with. The available options will depend on what apps you have installed on your smartphone. BLACKVUE... -
Page 27: Playing And Managing Video Files Using Your Computer (Windows/Mac)
To remove the microSD card, gently press on the card to release the lock then carefully pull the card out. To insert the microSD card, gently push the card into the slot until it locks into place and close the cover. Open side cover To remove To insert DR900S-1CH... -
Page 28: Opening Video Files In Blackvue Viewer
Insert the card into the microSD card reader and connect it to a computer. Download BlackVue Viewer from www.blackvue.com > Support > Downloads and install it on your computer. Run BlackVue Viewer. To play, select a video and click on the play button or double click the selected video. BLACKVUE... -
Page 29: Viewer Screen Composition
G-Sensor information View full screen Switch front/rear view Flip upside down Front/rear screen mode Flip horizontally Print Fit to playback screen Capture Note y All images shown are for illustration purposes only. Actual program may differ from images shown. DR900S-1CH... -
Page 30: Mac Viewer
Front/Rear reverse view Front/Rear screen mode Flip horizontally Recorded File List View upside-down Full Screen view Previous frame Timeline for sec selection Timeline for min selection Playback time Playback/Pause Volume control Next frame Playback speed control Play next file BLACKVUE... -
Page 31: Playing Video
Playing video Playing back videos In BlackVue Viewer double click a video file to play. BlackVue Viewer shows by default the files in the microSD card. To see files in another folder click the button and browse to the folder. Note y The playback of 4K UHD resolution and/or H.265 coded videos depends on your computer's hardware and software. - Page 32 If proximity sensor is set as a manual recording trigger in the firmware settings, touching or waving a Manual finger within 20mm of the sensor will turn on manual recording. Note y The dashcam requires a constant power source to record in parking mode. See "Optional accessories" on page 89 for more information. BLACKVUE...
-
Page 33: Checking The Displayed Time
The time the video was recorded is displayed in the lower left corner of the video in the playback screen. If the displayed time in the recorded videos is incorrect please see "Time settings" on page 52 or 71. Using BlackVue Viewer Front/rear screen mode (2CH) -
Page 34: Exploring The Timeline And G-Sensor Graph
You can check the impact sensitivity (G-Sensor) information in the line graph. Select month Timeline for hour/min/ sec selection G-Sensor information Select date • Dates with recordings are black • Click a date to filter recordings (date changes to red and circled) BLACKVUE... -
Page 35: Zoom Options
Use the mouse scroll wheel zoom. Right clicking will restore the video to the default size. y You can resize the playback frame or the BlackVue Viewer window by dragging the borders. y Full-screen view: Double click on the video image to enter full-screen view. Double click again or tap ESC to return to the default view. -
Page 36: Checking The Gps Data
Checking the GPS data You can check the GPS data of the recorded video in BlackVue Viewer while video is playing back. The driving speed and coordinates are displayed above the map frame. Note y GPS data is not recorded during parking mode. Map data cannot be displayed for parking mode recordings. -
Page 37: Managing Videos
Managing videos You can manage the recorded videos through the BlackVue Viewer program. You can also format the microSD card. Note y If the microSD card is full, by default the dashcam will record over the oldest videos first. Capturing or printing a still image from video Double click a file in the file list to play. -
Page 38: For Mac Users
For Mac users Go to \BlackVue\Record\. Select the video from the recorded video list. Click Move to Trash. BLACKVUE... -
Page 39: Exporting Videos
Click next to a video in the recorded video list. Click Export. If you want to extract a segment of a file select Save segment and edit the start and end second points. To export without audio select Sound Off. Click the OK button. DR900S-1CH... -
Page 40: Copying Videos
Click the Select folder button. y To copy multiple files at once check the boxes next to the file names and press the Copy to button y When copying files the segment adjustment and sound off tools are not available. BLACKVUE... -
Page 41: For Mac Users
For Mac users Go to \BlackVue\Record\. Select the video from the recorded video list. Click Copy "file name". DR900S-1CH... -
Page 42: Tips For Optimal Performance
Insert the microSD card into the microSD card reader and connect the reader to your computer. Download BlackVue Viewer (Windows) from www.blackvue.com > Support >Downloads and install it on your computer. Launch the BlackVue Viewer that is installed on your computer. -
Page 43: Format Using Blackvue Viewer (Macos)
Insert the microSD card into the microSD card reader and connect the reader to your computer. Download BlackVue Viewer (Mac) from www.blackvue.com > Support > Downloads and install it on your computer. Launch the BlackVue Viewer that is installed on your computer. - Page 44 Format the microSD card if the recorded video quality appears to be poor. y Only use official BlackVue microSD cards. Other cards may have compatibility issues. PittaSoft Co., Ltd. will not be held responsible for any problems caused by using another manufacturer's microSD card.
-
Page 45: Upgrading The Firmware
67 or 70. Check the firmware version and release notes and tap OK to start downloading. After the download completes tap OK to be taken back to the home screen. Make sure your BlackVue dashcam is on and nearby. DR900S-1CH... - Page 46 Go to your smartphone's Settings then select Wi-Fi, and make sure Wi-Fi is turned on. Choose your BlackVue dashcam from the network list. The dashcam’s default SSID begins with its model number (e.g. BlackVue****-******). Enter the password and tap join.
- Page 47 Open the BlackVue app. Select BLACKVUE WI-FI > > Firmware upgrade. Note y The firmware version currently installed on the microSD card is shown first. Below it, the firmware version you downloaded in step 4 is shown. Tap OK to apply the firmware upgrade.
-
Page 48: Upgrading The Firmware Using A Computer (Windows Or Mac)
For Mac users, click and select About BlackVue from the menu. Check the current firmware version of your BlackVue dashcam and proceed only if your version is not the latest one. Windows Format the microSD card. See "Formatting the microSD card" on page 42. - Page 49 Go to the BlackVue website (www.blackvue.com > Support > Download) and download the latest firmware for your BlackVue dashcam model in zip format. Unzip the downloaded file and copy the BlackVue folder to the microSD card. Insert the microSD card into the dashcam and connect the power to initiate the firmware upgrade. Make sure the power remains on until the upgrade is completed.
-
Page 50: Changing Settings
Changing settings Changing settings using your smartphone (Android/iOS) “Pair” your smartphone with the BlackVue dashcam via direct Wi-Fi (for details see "Opening video files" on page 16). Go to your smartphone's Settings > Wi-Fi and connect to your dashcam. Open the BlackVue app. Select BLACKVUE WI-FI >... -
Page 51: Basic Settings
Basic settings DR900S-1CH... -
Page 52: Time Settings
Time settings Select your time zone to auto-sync with GPS time or you can set the time and date manually after enabling Manual time setting. BLACKVUE... - Page 53 If you are unsure of your GMT offset please look up your city on https://greenwichmeantime.com/ *Selecting Daylight saving time will advance the clock by one hour. y When setting the time manually, please set to the expected time you will use the BlackVue (not the present time). DR900S-1CH...
-
Page 54: Video Settings
At "4K UHD (3840x2160) @30fps (Extreme)" resolution , the image quality is automatically set to Highest (Extreme) and Video segment length to 1 min. These settings can not be changed. y Frame rate may vary during Wi-Fi streaming. BLACKVUE... -
Page 55: Video Codec
Alternatively, if you lower the image quality setting to ‘high’ you will be able to stream new recordings. Enhanced night vision The dashcam has an intrinsic night vision feature. If you want to enhance it, enable Enhanced night vision. Brightness You can adjust the recording brightness level of the dashcam. DR900S-1CH... -
Page 56: Recording Settings
When turned off the dashcam does not record in normal mode. Automatic parking mode If enabled, the dashcam switches from normal mode to parking mode when the vehicle is stationary for 5 minutes. Voice recording When turned off the dashcam does not record audio. BLACKVUE... -
Page 57: Date & Time Display
‘Overwrite locked files with new event files when storage is full’ to allow the oldest locked files to be overwritten. Front camera rotation If you installed the front camera in a flipped position, use this setting to rotate the front camera image 180°. DR900S-1CH... -
Page 58: Sensitivity Settings
Sensitivity settings BLACKVUE... -
Page 59: G-Sensor (Normal Mode) / G-Sensor (Parking Mode)
(such as an impact or collision) it will trigger an event recording. You can adjust the sensitivity so minor incidents and bumps don't trigger an event recording. To turn off event recordings by impact detection set the G-sensor sensitivity to off. DR900S-1CH... -
Page 60: Motion Detection (Parking Mode)
In parking mode the dashcam continuously buffers video and saves a parking recording when motion is detected in the dashcam's field of view. You can adjust the sensitivity of the motion detection so minor motion caused by wind or rain doesn't trigger a recording. Please take into account your vehicle's surroundings when adjusting the sensitivity. BLACKVUE... -
Page 61: System Settings
Security (Normal mode) You can turn the security LED on/off for normal mode. Security (Parking mode) You can turn the security LED on/off for parking mode. Wi-Fi (Parking mode) You can turn the Wi-Fi LED on/off for parking mode. DR900S-1CH... -
Page 62: Proximity Sensor
You can create a user text overlay of up to 20 characters using a combination of English letters (A – Z, a – z), numbers (0 – 9), and symbols (:;‘/+-_()$#). The text is overlaid in the top-left corner of the recorded videos. BLACKVUE... -
Page 63: Wi-Fi Settings
Wi-Fi does not turn on when the dashcam turns on. Wi-Fi auto turn off Wi-Fi turns off if it is inactive for 10 minutes. Wi-Fi does not turn off automatically. You can also press the physical Wi-Fi / Format button on the dashcam to manually switch Wi-Fi on/off. DR900S-1CH... -
Page 64: Cloud Settings
Cloud settings Enable Cloud service Turn on to use the Cloud service. If you don't use the Cloud service you can turn it off. BLACKVUE... -
Page 65: Cloud Service Hotspot Settings
Tap 2 and 3 to add settings for additional hotspots. Your BlackVue will try to connect to hotspot 1 first. If it cannot connect to hotspot 1, it will then try to connect to hotspot 2, and then hotspot 3. -
Page 66: Push Notification Settings
Push notification settings You can customize when you want to receive push notifications. BLACKVUE... -
Page 67: Fw Language
FW Language You can change the Firmware language of your dashcam. DR900S-1CH... -
Page 68: Changing Settings Using Your Computer (Windows/Mac)
Changing settings using your computer (Windows/Mac) Click on the Settings button (Windows) or the menu (mac OS) to open the BlackVue settings panel. You will be able to change most of the BlackVue settings to customize its operation. BLACKVUE... -
Page 69: Blackvue Viewer Settings
BlackVue Viewer settings Select language Select your preferred language for the BlackVue Viewer interface from the dropdown list. Speed unit on map Change the speed unit displayed on the map. Select map service Change the mapping service used. Use video accelerator If you experience synchronization issues when playing front and rear recordings at the same time, we recommend you enable the video accelerator. -
Page 70: Firmware Settings
Please backup necessary recordings before changing time, video resolution, image quality or video segment length settings. If any of the aforementioned settings are changed and saved, the dashcam will format the microSD card and delete all recordings stored on the card including locked event files in order to ensure optimal performance. BLACKVUE... -
Page 71: Basic Settings
If you are unsure of your GMT offset please look up your city on https://greenwichmeantime.com/ *Selecting Daylight saving time will advance the clock by one hour. y When setting the time manually, please set to the expected time you will use the BlackVue (not the present time). DR900S-1CH... -
Page 72: Video Settings
Normal (8 Mbit/s) These are the maximum bit rates when the resolution is set to "4K UHD (3840x2160) @30fps". Increasing the image quality will increase the size of the video files. Loading and copying time will increase accordingly. BLACKVUE... -
Page 73: Recording Settings
When turned off the dashcam does not record audio. – Date & time display Turn on/off the date and time display on videos. – Speed unit Select km/h, MPH, or turn off. – Video segment length Choose between 1, 2 or 3 minute video segment lengths. DR900S-1CH... - Page 74 ‘Overwrite locked files with new event files when storage is full’ to allow the oldest locked files to be overwritten. – Front camera rotation If you installed the front camera in a flipped position, use this setting to rotate the front camera image 180°. BLACKVUE...
-
Page 75: Sensitivity Settings
(such as an impact or collision) it will trigger an event recording. You can adjust the sensitivity so minor incidents and bumps don't trigger an event recording. To turn off event recordings by impact detection set the G-sensor sensitivity to off. DR900S-1CH... -
Page 76: Motion Detection (Parking Mode)
You can adjust the sensitivity of the motion detection so minor motion caused by wind or rain doesn't trigger a recording. Please take into account your vehicle's surroundings when adjusting the sensitivity. Advanced sensitivity settings for normal and parking mode Advanced sensitivity settings allows you to fine-tune the event recording G-Sensor threshold, while watching pre-recorded G-Sensor data and video as a reference. BLACKVUE... - Page 77 Set the thresholds by adjusting the control bars next to each G-Sensor axis. Any G-Sensor data that crosses over the threshold on any of the 3 axes will trigger an Event recording. Event recording will occur No event recording will occur Click Save and close. DR900S-1CH...
-
Page 78: System Settings
System settings – Recording status You can turn the recording status LED on/off. – Security (Normal mode) You can turn the security LED on/off for normal mode. BLACKVUE... -
Page 79: Proximity Sensor
The dashcam reboots automatically once-a-day if in parking mode at the set time for improved stability. If the dashcam is recording at the set time, the scheduled reboot is skipped. You can enable/disable and change the time for scheduled rebooting. Default time is 03:00 am. DR900S-1CH... -
Page 80: Speed Alert
You can create a user text overlay of up to 20 characters using a combination of English letters (A – Z, a – z), numbers (0 – 9), and symbols (:;‘/+-_()$#). The text is overlaid in the top-left corner of the recorded videos. BLACKVUE... -
Page 81: Wi-Fi Settings
Wi-Fi does not turn on when the dashcam turns on. Wi-Fi auto turn off Wi-Fi turns off if it is inactive for 10 minutes. Wi-Fi does not turn off automatically. You can also press the physical Wi-Fi/Format button on the dascam to manually switch Wi-Fi on/off. DR900S-1CH... -
Page 82: Cloud Settings
Cloud settings Enable Cloud service Turn on to use the Cloud service. If you don't use the Cloud service you can turn it off. BLACKVUE... -
Page 83: Cloud Service Hotspot Settings
Tap 2 and 3 to add settings for additional hotspots. Your BlackVue will try to connect to hotspot 1 first. If it cannot connect to hotspot 1, it will then try to connect to hotspot 2, and then hotspot 3. -
Page 84: About The Cloud Service
If you have a mobile Wi-Fi hotspot (also known as a portable Wi-Fi router), a car-embedded wireless internet network or a Wi-Fi network near your car, you can use the BlackVue app to connect to BLACKVUE CLOUD and see in real-time where your car is and the dashcam's live video feed. - Page 85 Register your dashcam with your account (i) In the BlackVue app select BLACKVUE CLOUD and login to your account. (ii) Tap Yes to enable push notifications (this setting can be adjusted at any time later). (iii) Select Register new camera.
- Page 86 Click here for a step-by-step video tutorial, or go to the main menu and select Help > Video tutorials. (i) Make sure your BlackVue dashcam and mobile Wi-Fi hotspot are on. (ii) “Pair” your smartphone with the BlackVue dashcam via direct Wi-Fi.
- Page 87 (v) Choose your Wi-Fi hotspot from the list and enter the password. Tap 2 and 3 to add settings for additional hotspots. Once done, tap OK. Note y Up to 3 Wi-Fi hotspot SSIDs can be saved (e.g. home, portable hotspot and work). DR900S-1CH...
- Page 88 You can also change the dashcam settings through BLACKVUE CLOUD by tapping next to your camera name and selecting Camera settings. y For more information about using the BlackVue app, please refer to the manual by going to the main menu and selecting Help > App manual.
-
Page 89: Optional Accessories
Parking mode hardwiring kit (Optional) The BlackVue dashcam will turn off when the engine is turned off. To record video while the engine is turned off, a hardwiring kit (such as the Power Magic Pro) is required. The Power Magic Pro powers your dashcam when the engine is off by hardwiring it to the automotive battery. -
Page 90: Parking Mode Battery Pack (Optional)
Magic Battery Pack B-112 powers a single dashcam for up to 12 hours after 1 hour of rapid charging. When the engine is off the battery pack powers the dashcam. When the engine is on the dashcam is powered directly from the vehicle's battery and the battery pack charges. BLACKVUE... -
Page 91: Troubleshooting
Press and hold the Wi-Fi button on the dashcam, for 5 seconds and once voice instructions start, release the button. Then press once again to reset the Wi-Fi SSID and password to default. * The default Wi-Fi SSID and password can be found labeled on the dashcam when you remove it from its mount. DR900S-1CH... -
Page 92: Change Wi-Fi Ssid And Password Over The Cloud
Change Wi-Fi SSID and password over the Cloud Login to the BlackVue app. Select BLACKVUE CLOUD. Note y You can access FW settings Over the Cloud only when the dashcam is ON and connected to the internet (Cloud). A blue colored icon means the dashcam is connected to the Cloud while a grey colored icon means that the dashcam is not connected to the Cloud. - Page 93 Go back to the Firmware settings menu, tap and tap Save and close. DR900S-1CH...
-
Page 94: Change The Wi-Fi Password Using Blackvue Viewer (Windows Or Mac)
Insert the card into the microSD card reader and connect it to a computer. Launch BlackVue Viewer. *You can download BlackVue Viewer from www.blackvue.com > Support > Downloads and install it on your computer. In BlackVue Viewer click on the... -
Page 95: Product Specifications
Product specifications Model Name DR900S-1CH Color/Size/Weight Black/Width 118.5 mm x Height 36 mm/88 g Memory microSD Card (16 GB / 32 GB / 64 GB / 128 GB) Normal recording, Event recording (when impact is detected in normal and parking mode), Manual... - Page 96 FCC, CE, RoHS, Telec, WEEE, IC BlackVue Viewer Software * Windows XP or higher and Mac Yosemite OS X (10.10) or higher Application BlackVue Application (Android 4.4.2 or higher, iOS 9.0 or higher) Other Features Adaptive Format Free File Management System BLACKVUE...
-
Page 97: Recording Time
If the microSD card is full, older files are deleted first to make space for newly-recorded videos. y Total recording time is different depending on the memory capacity of the microSD card and the image quality of the video. DR900S-1CH... -
Page 98: Disposal And Recycling Information
Contact local authorities to learn about disposal and recycling options available in your area. 2. The correct disposal of your BlackVue dashcam will help prevent potential negative consequences for the environment and human health. - Page 99 It is prohibited to reproduce, copy, modify, or translate this instruction manual without permission. BlackVue is the registered trademark of Pittasoft Co., Ltd. Pittasoft Co., Ltd. reserves all rights regarding all works related to the BlackVue brand such as product design, trademarks, and product-promotional videos. It is prohibited to reproduce, copy, modify, or use related works without permission.
- Page 100 FCC ID: YCK-DR900S-2CH / HVIN: DR900S-1CH / IC: 23402-DR900S2CH DR900S-1CH 2018...
Need help?
Do you have a question about the DR900S-1CH and is the answer not in the manual?
Questions and answers
How often should you replace the SD card in The DR900S-1CH?