Av Connection - Samsung PM55F-BC User Manual
Hide thumbs
Also See for PM55F-BC:
- User manual (90 pages) ,
- User manual (89 pages) ,
- User manual (88 pages)
Table of Contents
Advertisement
Chapter 2. Device setup
AV connection
• Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
• You can connect a video device to the product using a cable.
‒ Connecting parts may differ in different products.
‒ Press the
button on the remote control to change the source.
SOURCE
Connection using an HDMI-DVI cable
The appearance may differ depending on the product.
• Audio will not be enabled if the product is connected to a video device using an
HDMI-DVI cable. To resolve this, additionally connect an audio cable to the audio
ports on the product and video device.
• After connecting a video device to the product with an HDMI-DVI cable, make sure to
configure the settings as shown below to enable the video and audio from the video
device.
‒
S ound
→ set
HDMI Sound
to
AV(HDMI)
‒
P icture
→ set each screen mode to
‒
S ystem
→
General
→ set
HDMI Hot Plug
Videos/Images
under
Picture Mode
to
On
• Supported resolutions include 1080p (50/60 Hz), 720p (50/60 Hz), 480p, and 576p.
HDMI1, HDMI2
AUDIO IN
DVI / PC / MAGICINFO IN
35
Advertisement
Table of Contents
