Advertisement
Quick Links
This quick start guide provides first time setup instructions and other useful instructions
for the epoc® NXS Host (Android™-based mobile computing device, PD470SH-B).
For complete user instructions, please refer to the epoc System Manual with epoc NXS Host,
available at siemens.com/document-library.
epoc NXS Host Components
MicroSD Slot
Function Key
(not used)
Scan Button
Rev.: 02
siemens.com/eifu
epoc Blood Analysis System
epoc NXS Host Quick Start Guide
Manufactured by:
Epocal Inc.
2060 Walkley Rd.
Ottawa, ON K1G 3P5 Canada
Tel.: +1-613-738-6192
Fax: +1-613-738-6195
Barcode scanner
Battery Indicator
Touchscreen
Authorized Representative:
Emergo Europe
Prinsessegracht 20, 2514 AP
The Hague, Netherlands
51015951 Rev.: 02 2021-02
Volume
Button
Power
Button
Scan Button
Advertisement
Related Manuals for epoc NXS Host
Summary of Contents for epoc NXS Host
- Page 1 This quick start guide provides first time setup instructions and other useful instructions for the epoc® NXS Host (Android™-based mobile computing device, PD470SH-B). For complete user instructions, please refer to the epoc System Manual with epoc NXS Host, available at siemens.com/document-library.
-
Page 2: Step 2: Connect To Your Wi-Fi Network
Note: To suspend the epoc Host, press the Power button on the side of the device. Note: To restart the epoc Host, press and hold the Power button for at least 10 seconds; the device will then restart. For facilities not using a data management system, skip Steps 2 and 3. - Page 3 From the Home page, tap Settings, then Wi-Fi Settings. • • Enable Wi-Fi by moving the toggle key to the right. • For networks that broadcast their SSID: Find your network on the list and tap on it. Enter the required network security information and password provided by your facility’s Information Technology department, then tap CONNECT.
- Page 4 • For networks that DO NOT broadcast their SSID: Scroll down to the end of the list and tap on Add network. Enter the required network security information as provided by your facility’s Information Technology department, then tap SAVE. • Return to the Settings screen by tapping the arrow button at the top left of the screen.
- Page 5 Note: Secure synchronization is available only when Transport Layer Security (TLS) is enabled on the data manager server. 2. Return to the Home page and sign out of the Administrator account: The epoc NXS Host is now ready for use.
- Page 6 How to reset the epoc NXS Host If the epoc NXS Host stops functioning or stops responding, press and hold the Power button for at least 10 seconds; the device will then restart. Power Button Never perform a reset during a test. This ends the test immediately.
- Page 7 How to remove or install the epoc NXS Host cradle Your epoc NXS Host comes with a cradle, which allows for a physical link between the Host and the Reader via the docking pivot on the Reader. On occasion, it might be necessary to remove the cradle from the Host.
Need help?
Do you have a question about the NXS Host and is the answer not in the manual?
Questions and answers