Trigger Types
The following table lists the available trigger types and properties, along with a description of each.
Table 6. Trigger list, with default settings
Trigger Type
Fader Above
Fader Below
Mute
Solo/AFL
Function Switch
Touch Strip
Bank Switch
Footswitch
GPI Input
Recall Snapshot
Preview Mode
Propagate Mode
Edit Mode
Talkback
Flip to Faders
Variable Groups Mode
Show Mode
Config Mode
System Start
Plug-In Rack Ready
Property 1
Channel name/number
Channel name/number
Channel name/number
Any input, output, VCA,
Solo In Place
Function Switch 1–16
Zone 1–4
Command + Bank Switch A–F
GPI input 1
Snapshot number and name
Property 2
Fader level –inf to +12 dB
(Default: –60 dB)
Fader level –inf to +12 dB
(Default: –inf)
On (default)
Off
On (default)
Off
Pressed (default)
Released
Pressed (default)
Released
Pressed (default)
Released
Open
Closed (default)
Open
Closed (default)
On (default)
Off
On (default)
Off
On (default)
Off
On (default)
Off
On (default)
Off
On (default)
Off
Description
Fader moved above threshold level
Fader moved below threshold level
Mute active/inactive
Solo/AFL active/inactive
On button press (down)
On button release (up)
Zone press (down)
Zone release (up)
Enables Command + Bank Switch
shortcut for use with User Layouts
stored with Snapshots.
Footswitch input high
Footswitch input low
GPI Input high
GPI Input low
Event triggered by snapshot
Preview Mode active/inactive
Propagate Mode active/inactive
Edit Mode active/inactive
Talkback active/inactive
Flip to Faders active/inactive
Variable Groups Mode active/inactive
Show Mode is active
Config Mode is active
System software initialized
Mirrors plug-ins rack Ready state
Chapter 21: Events 223
Need help?
Do you have a question about the VENUE S3L-X and is the answer not in the manual?