Download Print this page

Advertisement

Quick Links

Leo Arc
Floor Lamp
A S S E M B LY G U I D E
V4

Advertisement

loading
Need help?

Need help?

Do you have a question about the Leo Arc Floor Lamp and is the answer not in the manual?

Questions and answers

Summary of Contents for BROSA Leo Arc Floor Lamp

  • Page 1 Leo Arc Floor Lamp A S S E M B LY G U I D E...
  • Page 2 F O R Y O U R S A F E T Y Lift, don’t drag. This protects Check the assembly guide your floor and product. for required components. Assembly requires 2 people. Assembling this product on It's always easier with a a soft surface protects its friend.
  • Page 3 Safety MAX.60W 220-240V ~ 50Hz 1. For indoor use only. 2. Follow instructions carefully. Any deviations may be hazardous, or void your warranty. 3. If the external flexible cable is damaged, it should be replaced immediately by a certified electrician. 4.
  • Page 4 Components Before you get started, check you have all of the pieces below. If anything’s missing, we’ll sort it out right away. Simply visit: www.brosa.com.au/pages/product-return-and-parts-request ② Shade x 1 ③ Base Plate x 1 ④ ① Base Weight x 1...
  • Page 5 Step 1 ① Unscrew the nut from the bottom of the stand with the spanner B. Remove the nut along with the spring washer and flat washer. Keep the removed parts for the following assembly. ①...
  • Page 6 Step 2 ③ Fit the base plate into the rod on the bottom of ④ the stand followed by the base weight and make sure the rod protrudes from the bottom of the base weight. Fit the flat washer onto the rod followed by the spring washer and then the nut.
  • Page 7 Step 3 Unscrew the threaded rods from the connector properly using the Allen key but do not remove them completely as shown in diagram below.
  • Page 8 Step 4 Insert the upper part of the stand into the connector and make sure it sits in the connector firmly. Tighten the rods with the Allen key again.
  • Page 9 Step 5 Unscrew the shade ring and remove it from the bulb holder.
  • Page 10 Step 6 ② Attach the shade to the bulb holder. Attach the shade ring to the bulb holder again and screw it until the shade is tight and secure. ②...
  • Page 11 Step 7 Gently screw the correct bulb (not included) into the bulb holder. Enjoy! We hope your new Leo Arc Floor Lamp lights up your life!