Scalable BU series provides the scalable that can read out defined area of the screen. In the scalable mode, camera reads out only necessary area at the normal speed and reads out other area at high speed. The frame rate can be faster when the vertical height size is small. However, the frame rate cannot be faster only when the horizontal width size is small.
TriggerControl This section describes trigger control of TriggerControl category for the BU series. This camera series provides two kinds of exposure synchronization. 1. Normal Shutter mode : Free run operation (internal synchronization) 2. Random Trigger Shutter mode : Synchronized with external trigger input In Random Trigger Shutter mode, two kinds of trigger input are available.
ExposureTime BU series is able to adjust exposure time by using electric shutter control. BU USB series provides two kinds of exposure time control mode. - Manual : The exposure time is determined by “ExposureTime” register setting value. - NoSpecify : The exposure time is determined by “AcquisitionFrameRate”...
Gain This section describes Gain control of AnalogControl category of the BU series. This control adjusts the gain of the image. Gain ● Registers Register Visibility Access Description Gain Beginner Sets the absolute Gain. ● Setting - Set Manual Gain Set the following value to “Gain”...
BlackLevel This section describes BlackLevel control of AnalogControl category of the BU series. This control adjusts the black level of the image. It is adjustable from -25% to +25% as white saturation level is 100%. However, when BlackLevel is lower than 0[%], the image level may not be saturated.
Gamma This section describes Gamma correction of AnalogControl category for the BU series. This function allows you to apply a gamma correction to the output images. output luminance Gamma input luminance Gamma correction ● Registers Register Visibility Access Description Gamma Beginner Sets the Gamma correction.