Maintenance; Periodic Servicing; Performance Test; High Voltage Dividers - Spellman CZE Series Instruction Manual

Chapter 6
M
AINTENANCE
T
his section describes
performance testing procedures.
WARNING
THIS POWER SUPPLY GENERATES VOLTAGES
THAT ARE DANGEROUS AND MAY BE FATAL.
OBSERVE EXTREME CAUTION WHEN WORKING
WITH HIGH VOLTAGE.
WARNUNG
DIESES HOCHSPANNUNGSNETZTEIL ERZEUGT
LEBENSGEFÄHRLICHE HOCHSPANNUNG!
SEIEN SIE SEHR VORSICHTIG BEIM ARBEITEN
MIT HOCHSPANNUNG!

6.1 Periodic Servicing

The CZE series does not require periodic maintenance or
servicing.

6.2 Performance Test

WARNING
HIGH VOLTAGE IS DANGEROUS.
ONLY QUALIFIED PERSONNEL SHOULD
PERFORM THESE TESTS.
CZE MANUAL
periodic servicing and
WARNING
HOCHSPANNUNG IST GEFÄHRLICH!
NUR QUALIFIZIERTES PERSONAL DARF DIESE
PRÜFUNGEN DURCHFÜHREN.
High voltage test procedures are described in Bulletin
STP-783, Standard Test Procedures for High Voltage
Power Supplies. Copies can be obtained from the
Spellman Customer Service Department. Test equipment,
including an oscilloscope, a high impedance voltmeter,
and a high voltage divider such as the Spellman HVD-100
or HVD-200, is needed for performance tests. All test
components must be rated for operating voltage.

6.3 High Voltage Dividers

High voltage dividers for precise measurements of output
voltage with an accuracy up to 0.1% are available from
Spellman. The HVD-100 is used for voltages up to
100KV. The HVD-200 measures up to 200KV.
Spellman divider is designed for use with differential
voltmeters or high impedance digital voltmeters.
high input impedance is ideal for measuring high voltage
low current sources, which would be overloaded by
traditional lower impedance dividers
118030-001 REV F
20
The
The