Safety - Fronius Tauro 50-3 Operating Instructions Manual

Danger from faulty or incorrect holes.
This may lead to injuries to the eyes and hands as a result of flying debris and sharp
edges, as well as damage to the inverter.
▶
▶
▶
▶
▶
▶
1
2

Safety

Danger due to grid voltage and DC voltage from solar modules.
An electric shock can be fatal.
▶
▶
CAUTION!
When drilling, wear suitable protective goggles.
Only use a step drill when drilling.
Ensure that nothing is damaged inside the device (for example connection block).
Adapt the diameter of the hole to match the corresponding connection.
Deburr the holes using a suitable tool.
Remove the drilling residues from the inverter.
WARNING!
Ensure that both the AC side and the DC side of the inverter are de-energised be-
fore carrying out any connection work.
Only an authorised electrical engineer is permitted to connect this equipment to the
public grid.
Insert the screw connection in the hole
and secure to the torque specified by the
manufacturer.
The opening must be sealed in accord-
ance with the protection class of the invert-
er!
37