Program End - Removing The Laundry; End Of Program; Removing The Laundry - Miele TXR 860 WP Operating Instructions Manual

End of program

The program is finished when
Anti-crease appears in the display. The
Start/Stop sensor button will no longer
light up.
The tumble dryer will switch off
automatically 15 minutes after the end
of the Anti-crease phase (with programs
without an Anti-crease phase it will
switch off 15 minutes after the end of
the program).

Removing the laundry

Only open the door when the drying
process has finished. Otherwise, the
laundry will not be properly dried
through and cooled down.
 Pull the door open at the side with
the orange marker.
 Remove the laundry.
Items left in the dryer could be
damaged by overdrying when the
dryer is used the next time.
Always remove all items from the
drum.
6. Program end – removing the laundry
Finish/
 Touch the  sensor button to switch
the tumble dryer off.
 Remove the lint from the 2 lint filters
in the door opening: see "Cleaning
and care – Lint filters".
 Shut the door gently.
 Empty the condensed water
container.
Useful tip: The condensed water can
be used for the SoftSteam program.
See "Condensed water container –
Preparing the condensed water
container for the SoftSteam program".
Drum lighting
The inside of the drum lights up so that
you don't forget any items of laundry
when you empty it.
The drum lighting will go out
automatically to save energy.
Useful tip: To switch the drum lighting
on again, open the pull-down menu
from the overview menu and then touch
the  sensor button.
31