Table of Contents
Advertisement
Facility names and functions D
D1
POWER LED
Off: Camera power is off.
On(Green): Camera power is on.
D2
FILTER button
Push with ND button or CC button to select
optical filter.
D3
ND button
ND filter selects.
D4
ECC button
ECC filter selects.
D5
GAIN switch
Selects video circuit gain according to scene
brightness. Low, medium and high are
indicated beforehand in the setting menu.
D6
OUTPUT/AUTO KNEE switch
BAR: Color bar mode.
CAM/AUTO KNEE OFF:
Camera mode with AUTO KNEE off.
CAM/AUTO KNEE ON:
Camera mode with AUTO KNEE on.
D1
D5
D6
D9
D7
WHITE BAL switch
PRE: The white balance is set to the memory
value for 3200K.
A or B: When the AUTO W/B BAL switch C4 is
set to AWB, the white balance is adjusted
automatically.
D8
CS-1/CHECK switch
CHECK: Viewfinder displays camera
operating
data
recording elapsed time and audio level.
CS-1: A function assigned in the CUSTOM SW
menu can be turned ON or OFF.
D9
MENU button
The menu is displayed in VF and MON/RET
signal.
D10 POWER switch
The power switch works with only CR-P2HD.
Note
WHITE BAL A and B are for ENG operation,
WHITE BAL A and B become common data
under system operation.
8
D3
D4
D2
D10
0
C4
such
as
switch
status,
D7
D8
Advertisement
Table of Contents
