Pioneer DMH-Z5290BT Operation Manual
  1. Manuals
  2. Brands
  3. Pioneer Manuals
  4. Stereo Receiver
  5. DMH-Z5290BT
  6. Operation manual

Pioneer DMH-Z5290BT Operation Manual

Monitor rds av receiver
Hide thumbs
Table of Contents

Advertisement

Quick Links

DMH-Z5290BT
MONITOR RDS AV RECEIVER
Operation Manual

Advertisement

Table of Contents
loading

Related Manuals for Pioneer DMH-Z5290BT

Summary of Contents for Pioneer DMH-Z5290BT

  • Page 1 DMH-Z5290BT MONITOR RDS AV RECEIVER Operation Manual...

  • Page 2: Table Of Contents

    Contents Thank you for buying this Pioneer product. Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a safe place for future reference.
  • Page 3 ■ Other functions................. 78 ■ Appendix ................... 80 - 3 -...

  • Page 4: Precaution

    • If you notice smoke, a strange noise or odour from this product, or any other abnormal signs on the LCD screen, turn off the power immediately and consult your dealer or the nearest authorised Pioneer Service Station. Using this product in this condition may result in permanent damage to the system.
  • Page 5 • Do not install this product where it may (i) obstruct the driver’s vision, (ii) impair the performance of any of the vehicle’s operating systems or safety features, including air bags or hazard lamp buttons or (iii) impair the driver’s ability to safely operate the vehicle.
  • Page 6 • To prevent data loss and damage to the storage device, never remove it from this product while data is being transferred. • Pioneer cannot guarantee compatibility with all USB mass storage devices and assumes no responsibility for any loss of data on media players, iPhone, smartphone, or other devices while using this product.
  • Page 7 • When using a mobile phone, keep the aerial of the mobile phone away from the LCD screen to prevent disruption of the video in the form of spots, coloured stripes, etc. • To protect the LCD screen from damage, be sure to touch the touch panel keys only with your finger and do so gently.

  • Page 8: Parts And Controls

    Parts and controls Main unit LCD screen VOL (+/ Press to switch between the Application screen and the AV operation screen. Press and hold to switch to the camera view mode. NOTE To activate the camera view mode with this button, set [Back Camera Input] to [On] or [AV Input] to [Camera] (page 61).
  • Page 9 Remote control Volume (+/-) MODE Press to switch between the Application screen and the AV operation screen. Press and hold to switch to the camera view mode. NOTE To activate the camera view mode with this button, set [Back Camera Input] to [On] or [AV Input] to [Camera] (page 61).

  • Page 10: Basic Operation

    Basic operation Resetting the microprocessor CAUTION • Pressing the RESET button resets settings and recorded contents to the factory settings. – Do not perform this operation when a device is connected to this product. – Some of the settings and recorded contents will not be reset. •...
  • Page 11 If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. • Batteries (battery pack or batteries installed) must not be exposed to excessive heat such as sunshine, fire or the like.
  • Page 12 Touch [OK]. Initial Legal Disclaimer screen appears. Touch [OK]. The top menu screen appears. NOTE Once the speaker mode is set, the setting cannot be changed unless this product is restored to the default settings. Restore the default settings to change the speaker mode setting (page 79). Switching the speaker mode To change the speaker mode, you need to restore this product to the default settings.
  • Page 13 Touching an item on the list allows you to narrow down the options and proceed to the next operation. Appears when all characters are not displayed on the display area. If you touch the key, the rests are scrolled for display. NOTE This function is available only when you stop your vehicle in a safe place and apply the handbrake.
  • Page 14 Skips files forwards or backwards. Performs fast reverse or fast forwards. Displays setting menu screen (page 60). Closes the menu bar. Top menu screen Switches the top menu screen layout. Touch and hold appears at the top of the screen. Touch When you finish switching the layout, press Favourite source icons...
  • Page 15 AV operation area Displays the current source. Touch to go to the displayed source. TIPS • When the control icons are displayed at the bottom of the key, you can control the displayed operation. • You can also switch to display/hide the artwork with the following procedure. Touch and hold appears on the AV operation area.

  • Page 16: Bluetooth

    Bluetooth Bluetooth connection Turn on the Bluetooth function on the device. Press Touch then The Bluetooth screen appears. Touch [Connection]. Touch The unit starts to search for available devices, then displays them in the device list. Touch the Bluetooth device name. After the device is successfully registered, a Bluetooth connection is established by the system.
  • Page 17 CAUTION Never turn this product off and disconnect the device while the Bluetooth setting operation is being processed. Menu Item Description [Connection] Connect, disconnect, or delete registered Bluetooth device manually. Touch to delete registered device. To connect a registered Bluetooth device manually, touch the name of the device.
  • Page 18 registered devices are already connected, you can connect the remaining third device to use the audio function only from the switch devices key on the audio source screen. • The icon for the mobile phone currently being used is displayed on the Phone menu screen.
  • Page 19 The following items are displayed. • Name of the current mobile phone • List number of the current mobile phone • Reception status of the current mobile phone • Battery status of the current mobile phone If you connect two mobile phones to this product at the same time, you can switch between the mobile phones using the switch devices key.
  • Page 20 On the [Phone Book] screen, touch the desired name to display the contact’s phone number. Touch ▶Dialling from the preset dial list Touch Touch the desired entry on the list to make a call. The dial screen appears and dialling starts. ▶Deleting a phone number Press Touch...
  • Page 21 Touch The voice recognition function launches and the voice control screen appears. TIPS • You can also launch the voice recognition function by pressing button. • If two mobile phones are automatically connected to this product with the Bluetooth device auto connect function, the voice recognition function (Siri Eyes Free Mode) will be set on the second phone.
  • Page 22 NOTES • If two mobile phones are connected to this product and the first phone is set to private mode, you can receive incoming calls on the second phone while maintaining the call in progress on the first phone. • When two mobile phones are connected to this product and private mode of the first phone is turned off, if an incoming call on the second phone is answered while a call is in progress on the first phone or while dialling or receiving a call on the first phone, the call, dialling, or receiving on the first phone is ended.
  • Page 23 ▶The received call and dialled number histories • You cannot make a call to the entry of an unknown user (no phone number) in the received call history. • If calls are made by operating your mobile phone, no history data will be recorded in this product.
  • Page 24 The Bluetooth audio playback screen appears. Basic operation Bluetooth audio playback screen Track number indicator Switches between playback and pause. Skips files forwards or backwards. • By pressing then touch , you can also skip files forwards or backwards. • By pressing then touch and hold , you can also perform fast reverse or fast forwards.

  • Page 25: Av Source

    AV source Supported AV source You can play or use the following sources with this product. • Radio • USB The following sources can be played back or used by connecting an auxiliary device. • iPod • Spotify • Bluetooth® audio •...
  • Page 26 Selecting a source Source on the AV source selection screen Press then touch Touch the source icon. When you select [Source OFF], the AV source is turned off. Source on the source list Press then touch the AV operation key. Touch Touch the source key.
  • Page 27 Adjusting the range of favourite source icons area NOTE This function is available only when you stop your vehicle in a safe place and apply the handbrake. Press Touch and hold appears at the top left of the favourite source icons. Drag to the desired position.

  • Page 28: Radio

    Radio Starting procedure Press then touch Touch [Radio]. The Radio screen appears. Basic operation Radio screen Recalls the preset channel stored to a key from memory. Stores the current broadcast frequency to a key. Displays the preset channel list. Select an item on the list ([1] to [6]) to switch to the preset channel. Selects the FM1, FM2, FM3, or AM band.
  • Page 29 Manual tuning Seek tuning or non stop seek tuning Releasing the key in a few seconds skips to the nearest station from the current frequency. Keep holding the key for long seconds to perform non stop seek tuning. Searches for a broadcast by PTY information (page 29). TIPS •...
  • Page 30 To cancel the storage process Touch [Cancel]. Radio settings Press Touch then The system setting screen appears. Touch [AV Source Settings]. Touch [Radio settings]. The menu items vary according to the source. Menu Item Description [Local] Local seek tuning allows you to only tune into [Off] radio stations with sufficiently strong signals.
  • Page 31 Menu Item Description [Alarm Interrupt ]*2 The alarm broadcast can be received from the [On] [Off] last selected frequency, interrupting the other sources. [TA Interrupt]*2 Receives the traffic announcement from the last [On] [Off] selected frequency, interrupting the other sources. [News Interrupt]*2 Interrupt the currently selected source with [On] [Off]...

  • Page 32: Compressed Files

    Compressed files Plugging/unplugging a USB storage device You can play compressed audio, compressed video, or still image files stored in an external storage device. Plugging a USB storage device Pull out the plug from the USB port of the USB cable. Plug a USB storage device into the USB cable.
  • Page 33 Plug the USB storage device into the USB cable (page 32). Touch [USB]. Playback is performed in order of folder numbers. Folders are skipped if they contain no playable files. Basic operation TIPS • By pressing then touch , you can also skip files/chapters forwards or backwards. •...
  • Page 34 Sets a repeat play range for all files/the current folder/the current file. Plays files or does not play in random order. Displays the hidden function bar. You can also display the hidden function bar by flicking the bar from the right to the left.
  • Page 35 Selects the previous folder or the next folder. Constructs the database for using the Music Browse mode (page 35). Switches the current music information display. ▶Selecting a file using Music Browse mode You can select files to play back using the category list if the files contain tag information.
  • Page 36 Video source screen Hides the touch panel keys. To display the keys again, touch anywhere on the screen. Switches between playback and pause. Performs fast reverse or fast forwards. Touch again to change the playback speed. Stops playback. Performs frame-by-frame playback. Performs slow-motion playback.
  • Page 37 Selects a file from the list. Touch a file on the list to playback. Touching a folder on the list shows its contents. You can play a file on the list by touching it. Skips files forwards or backwards. Still image source TIPS •...
  • Page 38 Saves the current images as the wallpaper. Touch the following items then touch [Yes] to overwrite the image. [As AV Screen]: Saves the image as the wallpaper for the AV screen. [As HomeScreen]: Saves the image as the wallpaper for the top menu screen. [As Both]: Saves the image as the wallpaper for both the AV screen and top menu screen.

  • Page 39: Ipod

    iPod Connecting your iPod When connecting an iPod to this product, the settings are automatically configured according to the device to be connected. For details of the compatiblity, refer to Compatible iPod/iPhone models (page 90). NOTES • Depending on the generation or version of the iPod, some functions may not be available. •...
  • Page 40 Displays the link search screen. Select a song from the list related to the song currently playing. If you touch the artwork, the list of songs in the album is displayed. NOTE This function is not available while playing Apple Music Radio. Switches between playback and pause.
  • Page 41 Audio source screen 2 Changes the audiobook speed. Normal—Fast—Slow Displays the hidden function bar. Apple Music® Radio source Important Apple Music Radio may not be available in your country or region. For details about Apple Music Radio, visit the following site: http://www.apple.com/music/ NOTE This function is only available when using the iPod function with iOS 8 or higher (up to iOS 11) installed on iPhone 7, iPhone 7 Plus, iPhone SE, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone 5s,...
  • Page 42 Displays the pop-up menu for Apple Music Radio. • Touch [Play More Like This] to play back songs similar to the current song. • Touch [Play Less Like This] to set it not to play back the current song again. •...

  • Page 43: Weblink

    Using WebLink Important • Pioneer is not liable for any issues that may arise from incorrect or flawed app-based content. • The content and functionality of the supported applications are the responsibility of the App providers. • In WebLink, functionality through the product is limited while driving, with available functions determined by the App providers.
  • Page 44 WebLink Displays the main menu of the WebLink source screen. When the rear display is connected to this unit, video from the WebLink screen can be displayed to the rear display except while the AV source with video content is active even while driving. For iPhone users System requirement iOS 10.0 or higher (up to iOS 11.x)
  • Page 45 • The video playback capability depends on the connected Android device. Unlock your smartphone and connect it to this product via USB. Refer to the Quick start guide. Press Touch Touch [WebLink]. Touch desired icon in the tab. The WebLink app is launched. Using the audio mix function You can output the audio mixing AV source and an application for iPhone when WebLink is used.

  • Page 46: Apple Carplay

    • Apple CarPlay allows access to applications other than those listed that are subject to limitations while driving. • PIONEER IS NOT RESPONSIBLE AND DISCLAIMS LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS AND CONTENT, INCLUDING WITHOUT LIMITATION ANY INACCURACIES OR INCOMPLETE INFORMATION.
  • Page 47 Touch [Driving Position]. Touch the item. [Left] Select for a left-hand drive vehicle. [Right] Select for a right-hand drive vehicle. Starting procedure Connect an Apple CarPlay compatible device to this product via USB. Press Touch Touch [Apple CarPlay]. Touch Apple CarPlay icon in the tab. The application screen appears.
  • Page 48 Touch to mute. Touch again to cancel mute. Touch [+]/[-] to adjust the guidance volume. Displays the main sound volume. To adjust the main sound volume, press VOL (+/-) on the unit or touch [+]/[-]. NOTE The volume menu is displayed for four seconds. If the menu disappears, press VOL (+/-) again. The menu reappears.

  • Page 49: Android Auto

    • Android Auto allows access to applications other than those listed that are subject to limitations while driving. • PIONEER IS NOT RESPONSIBLE AND DISCLAIMS LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS AND CONTENT, INCLUDING WITHOUT LIMITATION ANY INACCURACIES OR INCOMPLETE INFORMATION.
  • Page 50 Touch [Driving Position]. Touch the item. [Left] Select for a left-hand drive vehicle. [Right] Select for a right-hand drive vehicle. Starting procedure Connect an Android Auto™ compatible device to this product via USB. Press Touch Touch [Android Auto]. Touch Android Auto icon in the tab. The application screen appears.
  • Page 51 Touch to mute. Touch again to cancel mute. Touch [+]/[-] to adjust the guidance volume. Displays the main sound volume. To adjust the main sound volume, press VOL (+/-) on the unit or touch [+]/[-]. NOTE The volume menu is displayed for four seconds. If the menu disappears, press VOL (+/-) again. The menu reappears.

  • Page 52: Spotify

    • Certain functions of the Spotify service are not available when accessing the service through Pioneer car audio/video products. • Spotify is a music service not affiliated with Pioneer. More information is available at https://support.spotify.com/. • The Spotify application is available for most iPhone and smartphone, please visit https://support.spotify.com/ for the latest compatibility information.
  • Page 53 Touch then Touch [AV Source Settings]. Confirm that [Spotify] is turned on. Press then touch Touch [Spotify]. NOTES • For details on Bluetooth connection, see page 16. • For details on USB connection for iPhone, refer to the Quick start guide. Basic operation Playback screen 1 (Track) Switches between playback and pause.
  • Page 54 Displays the hidden function bar. You can also display the hidden function bar by flicking the bar from the right to the left. Switches among connected devices. Selects a track or station from the list. Your Music: Selects a track or station from the list of saved song information. Browse: Selects a track from the category list.
  • Page 55 Playback screen 1 (Radio mode) Switches between playback and pause. Skips tracks forwards or backwards. By pressing then touch , you can skip songs forwards. NOTE The number of tracks that are skipped varies depending on the application. Starts new radio mode. Saves or deletes the current song information to or from Your Music.
  • Page 56 Playback screen 2 (Radio mode) Displays the hidden function bar. You can also display the hidden function bar by flicking the bar from the left to the right. Gives a Thumbs Up to the playing track. Gives a Thumbs Down to the playing track and skips to the next track. NOTE The number of tracks that are skipped varies depending on the application.

  • Page 57: Aux

    You can display the video image output by the device connected to video input. CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the handbrake. NOTE A Mini-jack AV cable (sold separately) is required for connection.
  • Page 58 Hides the touch panel keys. To display the keys again, touch anywhere on the screen. You can set the screen size for the video image (page 78). Switches between the video input and audio input. - 58 -...

  • Page 59: Av Input

    AV input You can display the video image output by the device connected to video or camera input. For details, refer to the Quick start guide. CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the handbrake.

  • Page 60: Settings

    Settings You can adjust various settings in the main menu. Displaying the setting screen Press Touch Touch one of the following categories, then select the options. System settings (page 60) Theme settings (page 68) Audio settings (page 69) Video settings (page 76) Bluetooth settings (page 16) System settings The menu items vary according to the source.
  • Page 61 [Auto Mix] Menu Item Description [Auto Mix] Select whether to perform mixing the sound output from [On] [Off] WebLink and AV source sound automatically. NOTE This function is only available when WebLink is used with an iPhone. [Input/Output settings] Menu Item Description [USB MTP] Select whether or not to activate USB MTP (Media Transfer...
  • Page 62 CAUTION Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen image may appear reversed. • Immediately verify whether the display changes to the rear view camera image when the gearstick is moved to REVERSE (R) from another position.
  • Page 63 Menu Item Description [Parking Assist Guide Adjusting the guidelines by dragging or touching Adjust] on the screen. Touch [Default] to reset the settings. CAUTION • When adjusting the guidelines, be sure to park the vehicle in a safe place and apply the handbrake. •...
  • Page 64 • Depending on your vehicle, this function may not work properly. In this case, contact your dealer or an authorised PIONEER Service Station. • Please use a PIONEER wiring harness for each car model when [With Adapter] mode is engaged, otherwise select [W/o Adapter].
  • Page 65 Menu Item Description [Touch panel calibration] Touch [Yes]. Touch two corners of the screen along the arrows then touch the centres of the two [+] marks at the same time twice. Press The adjustment results are saved. Press once again. Proceed to 16-point adjustment.
  • Page 66 Menu Item Description [Dimmer Duration] Adjust the time that the dimmer is turned on or off by dragging the cursors or touching You can use this function when [Dimmer Trigger] is set to [Time]. TIPS • Each touch of moves the cursor backwards or forwards in the 15 minute width.
  • Page 67 Menu Item Description [Brightness] Adjust the black intensity. [-24] to [+24] [Contrast] Adjust the contrast. [-24] to [+24] [Colour]* Adjust the colour saturation. [-24] to [+24] [Hue]* Adjust the tone of colour (which colour is emphasised, red, [-24] to [+24] or green).

  • Page 68: Theme Settings

    Menu Item Description [Firmware Update] CAUTION • The USB storage device for updating must contain only the correct update file. • Never turn this product off, disconnect the USB storage device while the firmware is being updated. • You can only update the firmware when the vehicle is stopped and the handbrake is engaged.

  • Page 69: Audio Settings

    Menu Item Description (custom)*1 Displays the background display image imported from the external storage device. (off ) Hides the background display. [Illumination]*2 Select an illumination colour from the colour list or create a defined colour. Coloured Keys Select the desired preset colour. (custom) Displays the screen to customise the illumination colour.
  • Page 70 Menu Item Description [Graphic EQ] Select or customise the equaliser curve. [Super Bass (S.Bass)] Select a curve that you want to use as the basis of [Powerful] [Todoroki] customising then touch the frequency that you want to [Vocal] [Flat] [Custom1] adjust.
  • Page 71 Menu Item Description [Source Level Adjuster] Adjust the volume level of each source to prevent radical [-4] to [+4] changes in volume when switching between sources other than FM. Touch to adjust the source volume after comparing the FM tuner volume level with the level of the source.
  • Page 72 Menu Item Description [Time Alignment] Select or customise the time alignment settings to reflect [On] [Off] the distance between the listener’s position and each Listening Position*1*2 speaker. You need to measure the distance between the [Off] [Front Left] [Front head of the listener and each speaker unit. Right] [Front] [All] Touch to select the listening position then...
  • Page 73 Menu Item Description [Automatic Level Control] Corrects automatically the audio level difference between the music files or the sources. [Off] Turns the auto level control setting off. [Mode1] Corrects a little the audio level difference between the music files or the sources (for the narrow dynamic range audio signal).
  • Page 74 ▶Before operating the Auto EQ function • Perform Auto EQ in a quiet place with the vehicle engine and air conditioning switched off. Also, cut the power of car phones or mobile phones in the vehicle, or remove them in advance. Surrounding sounds may prevent correct measurement of the vehicle’s acoustics.
  • Page 75 Disconnect the iPhone or smartphone device. Turn on the ignition switch (ACC ON). If the vehicle’s air conditioner or heater is turned on, turn it off. Switch the AV source to [Source OFF] (page 26). Press Touch then Touch [A-EQ&TA Measurement]. Connect the microphone for acoustical measurement (sold separately) with this product.

  • Page 76: Video Settings

    NOTE [Subwoofer Settings] is available only when [Subwoofer] is [On]. Press Touch then Touch [Crossover] or [Subwoofer Settings]. Touch to switch the speaker. Drag the graph line to set the cutoff position. Drag the lowest point of the graph to set the cutoff slope. The following items can also be set.

  • Page 77: Favourite Menu

    Favourite menu Registering your favourite menu items in shortcuts allows you to quickly jump to the registered menu screen by a simple touch on the [Favourites] screen. NOTE Up to 12 menu items can be registered in the favourite menu. Creating a shortcut Press then touch...
  • Page 78 Other functions Setting the time and date Touch the current time on the screen. Touch to set the correct time and date. You can operate the following items: Year, month, date, hour, minute. TIPS • You can change the time display format to [12hour] or [24hour]. •...
  • Page 79 [Trimming] An image is displayed across the entire screen with the horizontal-to-vertical ratio left as is. If the screen ratio differs from the image, the image may be displayed partly cut off either at the top/bottom or sides. NOTE [Trimming] is for image files only. TIPS •...
  • Page 80 → The operation is not compatible with here, contact your dealer or the nearest the video configuration. authorised Pioneer service facility. Random playback in Music Browse mode is released in the USB storage device. Common problems →...
  • Page 81 If the error persists, record the error message and contact your A black screen is displayed. → While operating an application, the dealer or your nearest Pioneer service centre. application was ended on the smartphone side. – Press...
  • Page 82 USB storage device your dealer or an authorised Pioneer Service Station for assistance. Error-02-9X/-DX → Communication failed. Spotify – Turn the ignition switch OFF and back Skip limit reached. – Disconnect the USB storage device.
  • Page 83 – Disconnect the USB storage device Pioneer Service Station. and do not use it. Turn the ignition switch to OFF, then to ACC or ON and Apple CarPlay then connect a compliant USB storage device.
  • Page 84 If the error message is still displayed after instructions, please reconnect the performing the above action, please device. contact your dealer or an authorised Pioneer Service Station. Detailed information for playable media Android Auto Android Auto has stopped. → The connected device is not compatible Compatibility with Android Auto.
  • Page 85 become jammed under the brake or the DivX file. The character strings before accelerator. the extension must be exactly the same. • There may be a slight delay when starting However, if there is only one DivX file and playback of audio files encoded with one subtitle file in a single folder, the files image data.
  • Page 86 MP3 compatibility • If a file contains more than 4 GB, playback stops before the end. • Ver. 2.x of ID3 tag is prioritised when both • Some special operations may be Ver. 1.x and Ver. 2.x exist. prohibited because of the composition of •...
  • Page 87 Maximum frame rate 30 fps registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by PIONEER .mov CORPORATION is under license. Other trademarks and trade names are those of their Compatible video codec MPEG4, H.264,...
  • Page 88 are permitted provided that the following DivX conditions are met: – Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. – Redistributions in binary form must reproduce the above copyright notice, DivX®...
  • Page 89 Lightning are trademarks of Apple Inc., registered in the U.S. and other countries. • Pioneer accepts no responsibility for data lost from an iPod, even if that data is lost App Store while using this product. Please back up your iPod data regularly.
  • Page 90 Important Requirements to access app-based connected content services using this product: • Latest version of the Pioneer compatible Apple CarPlay is a trademark of Apple Inc. connected content application(s) for the Use of the Works with Apple badge means smartphone, available from the service...
  • Page 91 Content application(s) or author’s rights as protected by the service by its provider. Copyright Law. • Pioneer is not liable for any issues that may arise from incorrect or flawed app- Notice regarding MP3 based content. file usage • The content and functionality of the supported applications are the responsibility of the App providers.
  • Page 92 In that case, please consult your cause moisture to form inside this dealer or the nearest authorised Pioneer product, resulting in possible damage. Service Station. • Small black dots or white dots (bright dots) may appear on the LCD screen.
  • Page 93 1 209 600 (2 520 × 480) Time alignment: Display method: 0 to 140 step (2.5 cm/step) TFT Active matrix driving Bass boost: Colour system: Gain: +12 dB to 0 dB (2 dB/step) PAL/NTSC/PAL-M/PAL-N/SECAM Speaker level: compatible +10 dB to -24 dB (1 dB/step) Temperature range: <Network Mode>...
  • Page 94 Speaker level: <USB video> +10 dB to -24 dB (1 dB/step) H.264 video decoding format: Base Line Profile, Main Profile, High Profile USB standard spec: H.263 video decoding format: USB 1.1, USB 2.0 full speed, USB 2.0 high Base Line Profile 0/3 speed VC-1 video decoding format: Max current supply: 1.5 A...
  • Page 95 © 2019 PIONEER CORPORATION. All rights reserved. <OPM_DMHZ5290BTID_EG_A> ID...

Table of Contents