Nice RUN1500 Instructions And Warnings For The Fitter

Run 1500
Pressure die-cast
aluminium base and release,
with epoxy painting
Code Description
RUN1500 Irreversible, 24 Vdc, with built-in control unit,
with electromechanical limit switch,
for sliding gates weighing up to 1500 kg
RUN1500P Irreversible, 24 Vdc, with built-in control unit,
with inductive limit switch,
for sliding gates weighing up to 1500 kg
Technical specifi cations
Code
Electrical data
Power supply (Vac 50/60 Hz)
Absorption (A)
Power (W)
Performance data
Speed (m/s)
Force (N)
Work cycle (cycles/hour)
Dimensional and general data
Protection level (IP)
Working temp. ( °C Min/Max)
Dimensions (mm)
Weight (kg)
80 Nice Gate&Door
Compartment
for control unit
protected by
removable box
Pack/pallet
12
12
RUN1500/1500P
230
2
400
0.25
1000
60
44
-20 ÷ +50
400x255x390 h
19
For sliding gates weighing
up to 1500 kg.
Versions with electromechanical
limit switch (RUN1500) and with
inductive limit switch (RUN1500P).
User-friendly: the BlueBUS technology,
enables to power and control a maximum
of 7 couples of photocells from the MoonBus
series using two wires only.
Practical: the control unit and PS124
buffer battery (optional) can be connected
by means of a simple connector
and can be housed directly inside the motor.
Advanced: the temperature sensor adapts
the motor force to weather conditions,
setting the thermal cut-out protection
accordingly; a master/slave selection
automatically synchronises 2 motors,
enabling the automation of sliding gates
with two opposing leaves.
Intelligent: thanks to the obstacle detection
system and automatic programming
of the working times.
Self-diagnosis by means of a fl ashing light.
8 programming levels.
Safe: acceleration and deceleration
can be adjusted at the beginning and end
of each opening and closing manoeuvre.
Sturdy: aluminium release handle
for easy opening.
Very quiet: gear motor on bearings.