FLIR Lorex LHB906 Quick Connection Manual

HD Wire-Free Security System
GUIDE
1 / 2
English Version 1.0
Package Contents
HD Wire-Free Security Cameras Rechargeable
Power Pack*
(Model Number: LWB3801)
DVR Power
USB Mouse Remote Control
Adapter
STEP 1: Initial Setup
Before you begin, you will need to prepare the power packs, wire-free cameras,
and the wireless receiver.
NOTE: Power packs come fully charged with no need for initial charging.
To prepare the cameras and receiver:
1. Insert the charged power packs into each camera base.
Push up until the power pack 'clicks' into place.
2. Twist the adjustment ring near the camera base
toward the unlocked position (
reposition each camera as shown to the right.
Connect one of the white antennas to each
camera.
* Top view
3. Connect the two black antennas to the wireless
receiver.
Need Help?
Visit us online for up-to-date software and complete instruction manuals.
1
Visit lorextechnology.com
Search for the model number
2
Click on your product in the
3
4
Click on the Downloads tab
Copyright © 2017 Lorex Corporation
As our products are subject to continuous improvement, Lorex reserves the right to modify product design,
specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved.
Quick Connection Guide
www.lorextechnology.com
* Per camera in multi-camera packs
HD DVR
(Model Number: LHB906)
Camera / Receiver Wireless
Antennas* Receiver
Power Pack
Ethernet Cable
Adapter
Adjustment ring
) to loosen and
of your product
search results
STEP 2: Setting Up the DVR
Next, you must set up the DVR and connect the wireless receiver.
To set up the DVR:
1. Connect the wireless receiver to
the USB port on the back panel of
the DVR.
NOTE: The receiver includes double-sided tape
and mounting screws for optional window or wall
mounting for improved line-of-sight with cameras.
2. Connect the DVR to your router
using the included Ethernet cable.
3. Connect the included power
adapter to the DVR. Wait a few
minutes for the system to start
up.
• This guide describes basic setup of the DVR only.
This installation is intended for users who wish to
monitor their system using the free Lorex Secure
app on their smartphone or tablet.
• You may choose to connect the included USB
mouse and a monitor with HDMI or VGA cable (not
included) for complete control over your wire-free
security system using the DVR. See the included
Quick Reference Guide for details.
Mounting Kit*
STEP 3: Connecting with Lorex Secure
Connect to your system using the free Lorex Secure app for smartphones and
tablets (iOS and Android).
HDMI Cable
To connect with Lorex Secure:
1. Download and install the free Lorex Secure app from the
App Store or Google Play Store.
2. Tap the Lorex Secure icon to launch the app.
3. Tap SIGN UP. Enter your email address and password to create a new account.
NOTE: If this is not the first device on your account, log in using your email
address and password, then tap LOG IN. Tap
Proceed to step 6.
4.
*
6. Scan the QR code on the
top of your DVR using
the camera on your
smartphone or tablet.
7. Enter your DVR's user name (default: admin) and password (default:
00000000). Tap DONE.
8. Enter a new, secure 8-15 character password. This password will be used to
connect to your system from now on.
Record your password below and store in a secure place:
9. Your system will appear on the homescreen of the app. Tap each channel
then tap the play button (
10. Remove the power pack from each camera by lifting
up the rubber seals covering the release buttons*.
Push both release buttons then pull down on the power
pack.
ATTENTION:
pack when removing to prevent it from falling.
OPTIONAL: Full DVR Setup
HDMI
5.
Tap
ADD DEVICE
) to stream live video.
Place your hand underneath the power
OR VGA*
* Not included
and then Security System.
Tap
Security System
* *
LHB900_QCG_EN_R1