Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Develco KEYZB-110
- Page 1 Keypad - KEYZB-110 Technical manual Revised 06.05.2020...
-
Page 2: Table Of Contents
Keypad - KEYZB-110 – Technical manual Content Cautionary notes ............................................5 Features ................................................ 6 Keypad - KEYZB-110 ........................................6 IAS ACE ..............................................6 Key features ............................................6 Endpoints............................................... 7 ZigBee Device Object (ZDO) ......................................7 IAS ACE ..............................................7 Develco Utility ............................................7 Supported Clusters.......................................... - Page 3 Keypad - KEYZB-110 – Technical manual 4.2.5 Time – Cluster id 0x000A ....................................15 4.2.5.1 Attribute ..........................................15 MMI user guide ............................................16 Panel description ..........................................16 Menu button ............................................17 5.2.1 EZ mode - Initiator ......................................... 18 5.2.2 EZ mode - Target ........................................18 5.2.3...
- Page 4 Develco Products assumes no responsibility for any errors, which may appear in this manual. Furthermore, Develco Products reserves the right to alter the hardware, software, and/or specifications detailed herein at any time without notice, and Develco Products does not make any commitment to update the information contained herein.
-
Page 5: Cautionary Notes
Develco Products A/S reserves the right to make changes to any product to improve reliability without further notice. Develco Products A/S does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under patent rights or the rights of third parties. -
Page 6: Features
Keypad - KEYZB-110 – Technical manual 2 Features Keypad - KEYZB-110 Enables secure access control The Zigbee-based Keypad includes a tag reader and allows for users to enable and disable an alarm system using a pin code and/or an RFID tag. In addition, access data can be updated remotely via a gateway to facilitate access control. -
Page 7: Endpoints
Application profile Id 0x0104 (Home Automation) • Application device Id 0x0401 (IAS Ancillary Control Equipment) Develco Utility • Application profile Id 0xC0C9 (Develco Products private profile) • Application device Id 0x0001 • Manufactor code for Develco Products is 0x1015 •... -
Page 8: Supported Clusters
The ZCL “General Function Domain” clusters in this section are implemented as server clusters. Refer to ZigBee Cluster Library Specification. http://www.zigbee.org/Specifications.aspx 4.1.1 Basic – Cluster id 0x0000 Only the first set has mandatory attributes, also the optional attributes that can be relevant to a Develco device are all in set 0x000. 4.1.1.1 Attribute... -
Page 9: Ias Ace Device - Ep 0X2C
Keypad - KEYZB-110 – Technical manual 0x01 Identify Query none 0x01 The identify cluster has 1 command as client. Name Payload Man/Opt Relevance and ref. 0x00 Identify Query Response Uint16 - Identify Time (seconds) 0x00 4.2 IAS ACE Device – EP 0x2C 4.2.1 IAS Zone - Cluster id 0x0500... -
Page 10: Commands
Keypad - KEYZB-110 – Technical manual To un-enrol the device the back end system has to write a new address into this attribute. Any value is valid. If the back end system writes an IEEE address then it will try to enrol to this devices represented by the IEEE address. -
Page 11: Commands
Keypad - KEYZB-110 – Technical manual 4.2.1.3 Commands The IAS ACE cluster has 3 commands as client server. Name Payload Bits Varies Data Uint8 Enum8 string 0x00 type Field Zone ID Arm Mode Arm/Disarm code name No payload, 0x02 Emergency... -
Page 12: Power Configuration - Cluster Id 0X0001
Keypad - KEYZB-110 – Technical manual 4.2.2 Power Configuration - Cluster id 0x0001 The power configuration cluster is described in ZigBee Cluster Library Specification 4.2.2.1 Attribute Name Type Range Man/Opt Relevance and ref. ZCL configure reporting is 0x0020 BatteryVoltage Uint8... -
Page 13: Ota Upgrade - Cluster Id 0X0019
Keypad - KEYZB-110 – Technical manual If it doesn’t find a poll client it will search again periodically. 4.2.4 OTA Upgrade – Cluster id 0x0019 The cluster provides a ZigBee standard way to upgrade devices in the network via OTA messages. The devices support the client side of the cluster. -
Page 14: Ota Upgrade Messages Diagram
Keypad - KEYZB-110 – Technical manual Identifiers 4.2.4.3 OTA Upgrade Messages Diagram Develco Products A/S Tangen 6 http://develcoproducts.com DK-8200 Aarhus N info@develcoproducts.com... -
Page 15: Time - Cluster Id 0X000A
Keypad - KEYZB-110 – Technical manual 4.2.5 Time – Cluster id 0x000A The Time cluster is a general cluster for time it is based on a UTC time in seconds since 0 hrs 0 mins 0 sec on 1st January 2000. Refer to [Z2] for ZigBee specification of the time cluster. -
Page 16: Mmi User Guide
Keypad - KEYZB-110 – Technical manual 5 MMI user guide Panel description Symbol Function Arm All Zones Disarm Arm Day/Home Zones Only Arm Night/Sleep Zones Only Emergency – Press button for 3 sec Delete last symbol input from keypress Input to Arm/Disarm code “0”... -
Page 17: Menu Button
Keypad - KEYZB-110 – Technical manual Low battery: Yellow LED will blink 2x every 60 second Timeout since last input (5 sec): Yellow LED blink 3x Wrong PIN code: Yellow LED blink 3x Disarm: Green LED solid on for 3 sec... -
Page 18: Ez Mode - Initiator
Keypad - KEYZB-110 – Technical manual 5.2.1 EZ mode - Initiator If the devices is not on the network EZ-Mode Network Steering is invoked when the user enter this menu. The led blinks once every 1 sec until the devices has joined the network. If the device was already on the network it will broadcast the PermitJoin messages. -
Page 19: General Network Behaviour
Keypad - KEYZB-110 – Technical manual 6 General network behaviour Installation When the device is virgin and powered for the first time it will start looking for a ZigBee PAN Coordinator or router to join. The device will scan each ZigBee channel starting from 11 to 24. The LED will flash once every second until it joins a device. -
Page 20: Low Battery
Keypad - KEYZB-110 – Technical manual #Scan mode - 1 #Sleep mode #Scan mode - 2 #Sleep mode #Scan mode - 2 MCU is in sleep Scan current MCU is in sleep Scan current ch 3 Scan current mode (Radio off) -
Page 21: Specifications
Keypad - KEYZB-110 – Technical manual 7 Specifications General Dimensions (L x B x H) 90 x 90 x 22 mm Colour White – Optional black Battery Battery: 4 x AA Alkaline Battery life 12 Months (Normal usage) Radio Sensitivity: -100 dBm... -
Page 22: Contact Information
Keypad - KEYZB-110 – Technical manual 8 Contact Information Technical support: Please contact Develco Products for support. products@develcoproducts.com Sales: Please contact Develco Products for information on prices, availability, and lead time. info@develcoproducts.com Develco Products A/S Tangen 6 http://develcoproducts.com DK-8200 Aarhus N...
Need help?
Do you have a question about the KEYZB-110 and is the answer not in the manual?
Questions and answers