Download Print this page
Streetwize SWBCLED10 Quick Start Manual

Streetwize SWBCLED10 Quick Start Manual

6/12volt 10amp fully automatic battery charger

Advertisement

Quick Links

SWBCLED10 Manual AW 2018_Layout 1 17/10/2018 09:52 Page 1
6. Battery charger is fused (2 spares included). The fuse will break and the charger will
be switched off upon - Short Circuit, Overload or Reverse Polarity. Simply change
the "blade" style fuse to restart charging.
7. To disconnect the battery when charged, switch off the mains supply and unplug.
Caution: Because of risk of explosive gas, only disconnect the crocodile clips when
the mains are disconnected. Check the fluid levels and top up if necessary and wipe
the battery clean. If the battery has been removed, replace in the vehicle and
re-connect.
Product Specifications:
Streetwize Part Number: SWBCLED10
Voltage Rating Input: 240V, 50Hz - 120W
Output Rating: 6/12V - HI: 6.5 ADC equal to 10Amps RMS
6/12V - LOW: 3.5 ADC equal to 6Amps RMS
The WEEE symbol
on this product means that this product should be ethically
dismantled or recycled to minimise environmental impact.
Please check with your local authority for more information.
IMPORTANT: ADDITIONAL SAFETY INFORMATION
This Battery Charger is NOT intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they are supervised or have been given instruction concerning use of the Battery
Charger by a person responsible for their safety.
FOR INDOOR USE ONLY
WARRANTY: To validate the warranty on this product, please go to our web site and
enter your details on the warranty screen. www.streetwizeaccessories.com.
RoHS
COMPLIANT
M17 1RY
Streetwize Accessories:
Unit 1, Royce Trading Estate, Ashburton Road West,
Trafford Park, Manchester M17 1RY
Sales enquiries: sales@streetwizeaccessories.com
Technical enquiries: support@streetwizeaccessories.com
Telephone: 0161 447 8597
www.streetwizeaccessories.com
6/12Volt 10Amp
Fully Automatic
Battery Charger
Part No.
Rated Output
Battery Voltage
SWBCLED10
10Amp
Please read these instructions carefully before operating this battery charger.
SWBCLED10
Battery Capacity
6/12 Volt
20-100 Ah

Advertisement

loading
Need help?

Need help?

Do you have a question about the SWBCLED10 and is the answer not in the manual?

Questions and answers

Summary of Contents for Streetwize SWBCLED10

  • Page 1 SWBCLED10 Manual AW 2018_Layout 1 17/10/2018 09:52 Page 1 6. Battery charger is fused (2 spares included). The fuse will break and the charger will be switched off upon - Short Circuit, Overload or Reverse Polarity. Simply change the “blade” style fuse to restart charging.
  • Page 2 SWBCLED10 Manual AW 2018_Layout 1 17/10/2018 09:52 Page 3 2. If you have a maintenance free/sealed battery it is not necessary to carry out the following checks. Carefully remove all the caps from each battery cell, Battery Maintenance: and ensure the liquid as at the recommended level. Top up with distilled or de- ionised water if required (ALWAYS wear protective gloves as this liquid is corrosive).