Pll rds fm dab/dab+ vintage radio dual alarm clock usb input for smartphone/tablet charging (42 pages)
Summary of Contents for Majestic RS 133
Page 1
ALLARME MOD. RS 133 MANUALE D’ISTRUZIONI La New Majestic SpA dichiara che il prodotto è rispondente al D.M. 548 del 28.08.95 ed in particolare a quanto indicato nell’art. 2 comma 1 Si raccomanda di leggere attentamente il seguente manuale d’istruzioni...
Page 2
FUNZIONI E COMANDI 1. ON –OFF / ALLARME OFF 2. << / SINTONIA - / ANNO/MESE-GIORNO / TEMPERATURA / C-F / TASTO SKIP INDIETRO 3. >> / SINTONIA + / SKIP AVANTI / NAP / DST 4. SNOOZE / SLEEP / REGOLAZIONE LUMINOSITA’ / RISPARMIO ENERGETICO 5.
Page 3
MODALITA’ DISPLAY LED Indicatore ORA Indicatore ALLARME 1 Indicatore PM Indicatore ALLARME 2 Indicatore MESE Indicatore GIORNO Indicatore TEMPERATURA INTRODUZIONE • Selezionare una posizione adeguata per l’apparecchio, che sia un luogo asciutto e non scivoloso dove sia facile maneggiarlo. • Inserire la Batteria di back up INSTALLAZIONE/SOSTITUZIONE BATTERIA DI BACK-UP L’apparecchio è...
Page 4
IMPORTANTE: Accertarsi che la batteria sia inserita correttamente. L’inserimento con polarità errata potrebbe dannegiare l’apparecchio e invalidarne la garanzia. Per ottenere una performance ottimale si raccomanda l’uso di batterie alcaline di buona qualità. COLLEGAMENTO ALIMENTAZIONE AC Inserire il cavo alimentazione AC nella presa di corrente domestica.
Page 5
REGOLAZIONE VOLUME Premere i tasti (6) e (7) per impostare il livello volume desiderato. Il livello volume apparirà sul Display LED. CONTROLLO INTENSITA’ A radio spenta, premere il tasto REGOLAZIONE LUMINOSITA’ (4) per impostare la luminosità del display LED scegliendo tra i due livelli.
Page 6
PER OTTENERE UNA RICEZIONE OTTIMALE Per assicurarsi il massimo della performance dalla ricezione radio FM, estendere completamente il cavo antenna FM. PER IMPOSTARE/RICERCARE STAZIONI RADIO MEMORIZZATE 1. Premere il tasto (2) e (3) per selezionare la stazione radio desiderata. 2. Tenere premuto il tasto (5),(Nota: “P01” lampeggerà sul display se si stanno memorizzando le stazioni radio per la prima volta).
Page 7
AL 2 → Beep AL 2 → Radio AL 2 → Volume finale radio AL 2 → Ora Normale. 1. In modalità standby, premere il tasto AL1 (o AL2) per mostrare l’ora allarme memorizzata. 2. Tenere premuto ancora il tasto AL1 (o AL2) per circa 3 secondi fino a quando l’indicatore dell’ora sul Display LED lampeggerà.
ON/STANDBY. L’ allarme si arresterà immediatamente. 7. Premere l’allarme AL1 (o AL2) per terminare le impostazioni e tornare alla visualizzazione normale del display. 8. Per disabilitare l’allarme 1 o 2 premere il tasto AL1 o AL2 per circa 2 secondi e le icone corrispondenti AL1 (o AL2) si spegneranno.
Page 9
timer sleep in un lasso di tempo che va da 90, 60, 30, 15 minuti. Attendere circa 10 secondi dopo la selezione per confermare la stessa, l’apparecchio riprodurrà per la durata del tempo selezionato quindi si spegnerà automaticamente. 3. Per cancellare il timer sleep, premere ripetutamente il tasto SLEEP fino a che la scritta OFF apparirà...
Indicatore Indicatore Indicatore Indicatore ORA MESE GIORNO TEMPERATURA Display per 10 secondi Display per 5 secondi Display per 5 secondi Per cancellare questa funzione, tenere premuto il tasto (2) per circa 3 secondi fino a che OFF apparirà sul display. Il display visualizzerà...
Page 11
AVVERTENZE 1. Nessuna sorgente di fiamma libera, come le candele accese, deve essere posizionata vicino all’apparecchio. 2. Non posizionare il prodotto in luogo chiuso, come una libreria, che impedirebbe la normale ventilazione. 3. Non impedire la ventilazioone coprendo l’apparecchio con giornali, tende, coperte o simili.
Page 14
Gentile Cliente, La ringraziamo per il Suo acquisto e Le ricordiamo che il prodotto risponde alle normative vigenti in fatto di costruzione e di sicurezza. Nel caso si dovessero riscontrare anomalie o difetti del prodotto, la New Majestic S.p.A. offre una Garanzia convenzionale soggetta alle condizioni qui riportate (precisando che la Garanzia convenzionale lascia impregiudicati i diritti del consumatore di cui al D.
Page 15
DUAL ALARM FM DIGITAL CLOCK RADIO MOD. RS 133 INSTRUCTION MANUAL La New Majestic SpA dichiara che il prodotto è rispondente al D.M. 548 del 28.08.95 ed in particolare a quanto indicato nell’art. 2 comma 1...
Page 16
FUNCTION AND CONTROLS 1. ON –OFF / ALARM OFF 2. << / TUNE - / YEAR/MONTH-DAY / TEMPERATURE / C-F / BETWEEN DISPLAY CONTENTS ON-OFF/ SKIP BACK BUTTON 3. >> / TUNE + / SKIP FORWARD / NAP / DST 4.
LED DISPLAY MODE TIME Indicator ALARM 1 Indicator Indicator PM ALARM 2 Indicator MONTH Indicator DAY Indicator TEMPERATURE Indicator GET STARTED • Select a proper place for the device such as a dry, and even non slip area where you can easily operate the device. •...
IMPORTANT: Be sure that the battery is installed correctly. Wrong polarity may damage the unit and void the warranty. For best performance and longer operating time, we recommend the use of good quality battery. AC POWER CONNECTION Plug the AC power cord into a household outlet AC source. SETTING THE CALENDAR AND TIME 1.
Page 19
SWITCHING THE UNIT ON/OFF Press the unit on/off button (1) to switch the unit on or off. VOLUME ADJUST Press the unit (6) and (7) button to set the desired volume level. The volume level reading will appear in the LED DISPLAY. DIMMER CONTROL In radio off mode, press the DIMMER button (4) allows you to set the brightness of the LED display to high, low 2 levels.
Page 20
Notes: Use manual tuning to select weaker stations that might be skipped during automatic tuning. If the automatic tuning does not stop on the exact frequency of the station, for example, it stops on 88.9 MHz instead of 88.8 MHz, use the manual tuning method to “fine tune” to the exact frequency of the desired station.
Page 21
SETTING THE ALARM 2 (BEEP) Normal Time→ AL 2 Hour → AL 2 Min → AL 2 weekday Alarm → AL 2 beep → Normal Time. SETTING THE ALARM 2 (RADIO) Normal Time → AL 2 Hour → AL 2 Minute → AL 2 weekday → AL 2 beep →...
POWER ON/STANDBY button. The alarm will also be stopped immediately. 6. Press the AL1 (or AL2) button to finish setting and exit to normal time display. 7. To disable ALARM 1 (or 2) from automatically sounding on the upcoming days, press and hold the AL1 (or AL2) button for about 2 seconds, the corresponding AL1 (or AL2) INDICATOR will go off.
Page 23
time ‘90’ (minutes) appears in the LED DISPLAY. 2. Repeatedly tap the SLEEP button to select a sleep timer of 90, 60, 30 or 15 minutes. Wait for about 10 seconds after your selection for the unit to confirm the selection, the unit will play for the selected length of time then turn itself ‘Off’...
MONTH TEMPERATURE TIME Indicator Indicator Indicator Indicator Display per 10 second Display per 5 second Display per 5 second To cancel this function, press and hold the unit button (2) for about 3 seconds until “OFF” appears on the LED DISPLAY. The DISPLAY will switch back to normal time display.
Page 25
WARNING 1. No naked flame sources, such as lighted candles, should be placed on the apparatus. 2. Do not place the product in closed bookcases or racks without proper ventilation. 3. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table- cloths, curtains, etc.
Need help?
Do you have a question about the RS 133 and is the answer not in the manual?
Questions and answers