Cleaning - Silvercrest SKT 2000 B1 Operating Instructions Manual

RP100157 Konvektor Timer LB1 Seite 47 Mittwoch, 11. Juni 2014 12:30 12
6.7 Frost protection setting
With this function, the appliance prevents the
room temperature falling below the frost line.
1. Turn the temperature selector 8 to the
Frost symbol 9.
2. Set the main switch 14 to "I" to switch
on the power supply.
To ensure your appliance gives you lasting
service, you should clean it regularly.
Warning! To avoid the danger of
an electric shock or burning:
– remove the mains plug before
each clean;
– allow the appliance to cool
down;
– never immerse the appliance in
water;
– never allow water or cleaning
agent to run into the appliance.
1. Carefully remove major dust deposits
with a vacuum cleaner.
2. Clean the outside of the appliance with
a damp cloth. You could also use a little
washing-up liquid.
Caution! Never use caustic or abrasive
cleaning agents, as this could damage
your appliance.
3. Wipe the appliance with a cloth
moistened with clear water.
4. Do not use the appliance again until it
has dried completely.
SKT 2000 B1
3. Use the switches 5 and 6 to select a
heating level (see "6.2 Setting the
heating setting" on page 45).
4. Switch on the fan by pressing the fan
switch 7
page 46).
6.8 Transporting the appliance
If you wish to transport the appliance,
always carry it by the carry handles 1.

7. Cleaning

(see "6.4 Fan function" on
47