Related Manuals for Lintelek ID115U
Summary of Contents for Lintelek ID115U
- Page 1 Fitness Tracker User Manual ID115U HR / ID115U Thank you for purchasing our products. This manual addresses the safety guidelines, warranty and operating instructions. Please review this manual thoroughly before operating your device.
-
Page 2: Safety And Warranty
SAFETY AND WARRANTY Important Safety Instructions The device contains electrical equipment that may cause injury if not used properly. For example, prolonged contact may contribute to skin allergies for some users. To reduce irritation, please read the safety guidelines on the following pages to ensure proper use and care. - Page 3 ● For light colored arm bands, minimize direct contact with dark-colored clothing, as color transfer could occur. ● Dispose of this device, the device’s battery and its package in accordance with local regulations. ● Don’t not check any notifications, GPS, or any information on your device’s display while driving or in other situations where distractions could cause injury or hazardous.
- Page 4 ● While the optical wrist heart rate monitor technology typically provides the best estimate of a user's heart rate, there are inherent limitations with the technology that may cause some of the heart rate readings to be inaccurate under certain circumstances, including the user's physical characteristics, fit of the device, and type and intensity of activity.
-
Page 5: Warranty
● If your bands get wet—like after sweating or showering—clean and dry them thoroughly before putting them back on your wrist. ● Be sure your skin is dry before you put your bands back on. Warranty We strives to build our products with the highest attention to detail and craftsmanship. -
Page 6: Usb Charging
Please charge your new device for 10 minutes before initial use. USB Charging The red indicator is on during charging. Note: If the charging red indicator is not on when you plug the device in a USB port for charging, check the direction of the device's charging plug and move to the correct direction. - Page 7 System Requirement (Smart Phone Only) • iOS 7.1 & above • Android 4.4 & above • Bluetooth 4.0 & above Quick Start Guide 1. Download "VeryFitPro" APP for Android and iOS Smart Phones Option 1: Search for "VeryFitPro" in APP store or Google Play. Once APP is located, please download and install it to your smart phone.
- Page 8 "Device" tab. 2) Tap "Bind Device" at the bottom of "Device" page and your smart phone starts searching devices. In the list of found devices, tap ID115U/ID115U HR and confirm to connect the device to your smart phone. Notes: 1) The fitness trackers screen needs to be awake (tap the touch key to light the screen) to bind with your smart phone.
- Page 9 Please tap the touch key on the device's screen: 1. Display Time Heart Rate Sport → (ID115U HR) Distance Steps → → Calories Activity Time →...
- Page 10 Tap the touch key to switch to the Sport mode , then press and hold the key for 3 sec. to enter Sport mode. → → Heart Rate Sport Start Stopwatch (ID115U HR) Steps Calories Distance → → Clock Sport Stop Press and hold the touch key for 3 sec.
- Page 11 Alarm alert, call alert, sedentary alert, etc. with silent vibration. Remote Camera Control: Use the tracker to control smartphone shooting photos. Heart Rate Monitoring (for ID115U HR): Monitor your heart rate status and help you make proper exercise plan. Device Data Storage: Activity data will be cleared at every 0:00am as a cycle, but the device itself can restore 7 days’...
- Page 12 5) Open "VeryFitPro" APP on your smartphone and tap "Device" → "Bind device", then your smartphone starts searching devices. Select "ID115U" or "ID115U HR" in the list of found devices, and tap "ID115U" or "ID115U HR" to connect the device to your smartphone.
- Page 13 Measure heart rate (ID115U HR version) Make sure the wrist band sits neatly on your wrist before use. Tap the touch key to go to the heart rate mode and wait for 10~20s to detect the heart rate. Connect to the smartphone...
- Page 14 Water proof The tracker is splash waterproof (IP67), you can wash your hands without taking it off, but do not shower or swim with it. Wrist sense When you turn over your wrist slowly by 90 degrees, the device screen will be on. Turn on this function by going to the APP →...
- Page 15 Made in China...
Need help?
Do you have a question about the ID115U and is the answer not in the manual?
Questions and answers
Hi I bought the product when it's charging g I see the red light when it's fully charged it indicates that it has finished charging but after charging the display screen doesn't show anything else. It only shows something g when it's charging and when it's done charging
The Lintelek ID115U display screen may not show anything after charging due to several reasons:
1. Screen is Off – Tap the touch key to wake up the screen.
2. Battery Issue – Ensure the device is properly charged for a sufficient time. The battery may be depleted.
3. Device Not Functioning – Try restarting the device by disconnecting and reconnecting it.
4. Display Visibility – The screen is made of OLED material, so it may be difficult to see in bright light. Shade it with your hand to check visibility.
If the issue persists, contact the seller for support under the 12-month warranty.
This answer is automatically generated