Steps
1. Align the solid-state drive with the socket on the system board and slide it in.
2. Replace the screw (M2X3) that secures the M.2 PCIe solid-state drive to the system board.
Next steps
1. Install the
hard-drive and optical-drive
2. Install the
3.5/2.5-inch hard-drive
3. Install the
front
bezel.
4. Install the
side
cover.
5. Follow the procedure in
Removing the M.2 2280 PCIe solid-state drive
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
4. Remove the
3.5/2.5-inch hard-drive
5. Remove the
hard-drive and optical-drive
About this task
The following images indicate the location of the solid-state drive and provide a visual representation of the removal procedure.
26
Removing and installing components
bracket.
assembly.
After working inside your
Before working inside your
assembly.
bracket.
computer.
computer.