Electricity Display; Motor Power Indication; Error Code Display; General Settings - Yolin YL80C User Manual

Electricity Display

◆
The five-segment display of battery power shows that when the battery voltage is high, the five-segment LCD is on,
and when the battery is under-voltage, the outer frame of the battery flashes at a frequency of 1HZ, indicating the need to
charge immediately.

Motor Power Indication

◆
The output power of the motor can be known through the instrument. The display mode is shown in the following
figure.

Error Code Display

◆
When the electric control system of the electric vehicle fails, the instrument will automatically display the error code.
See Table 1 for the definition of the detailed error code.
When there is an error code in the display interface, please troubleshoot the fault in time. After the fault occurs,
■
the electric vehicle will not run normally.

General Settings

Press the key for a long time to start the machine. In the startup state, when the vehicle is stationary, press and
hold the UP + DOWN key for more than 2 seconds at the same time, and the instrument enters the normal setting state.
Each setting item needs to be made with the vehicle stationary.
■

Single Mileage Clear

◆
Battery Charge Display Interface
Motor Power Display Interface
Error Code Display Interface
6
Battery undervoltage flicker