Program Edit; Use V / V To Select An Option Then Press Enter To Confirm - NEC NDRV-60 Manual

Before Operation (Continued)

Program Edit

You can edit a channel manually (add, delete, name,
move, etc.).
Auto Programming
Program Edit
Clock Set
TV Aspect
VCR Play System
Progressive Scan
Factory Set
Press SETUP.
1
The Setup menu appears.
Use v / V to select the GENERAL option.
2
While the GENERAL option is selected, press B
3
to move to the second level.
Use v / V to select the Program Edit option then
4
press B to move to the third level.
"Edit" icon is highlighted.
Press ENTER.
5
Program List menu appears.
PR
01
02
03
04
PR-01
05
06
07
08
09
10
11
Select
Move
Use v / V to select a PR number then press
6
ENTER.
Program List options appears on the left side of the
menu display.
Use v / V to select an option then press ENTER
7
to confirm.
Program Edit: Edits the select-
Program Edit
ed program.
Station Rename
Station Rename: Edits the sta-
Move
tion name.
Delete
Move: Moves the program's
location on the program list.
Delete: Deletes the program
from program list.
Press RETURN (O) repeatedly to exit Program
8
List menu.
Edit
Ch. MFT Station
C 12 +10 AAA
C 23 0 BBB
C 7 0 CCC
C 27 -10 DDD
C 17 0
C 33 0
C 34 +20
C 47 0
C 10 -60
Page Up/Down Close
Program Edit
You can perform a search to select and store TV chan-
nels manually.
1. Use v / V to select a program on the Program List
menu then press ENTER.
Program List options appears on the left side of the
Program List menu.
2. Use v / V to select 'Program Edit' option from the
options then press ENTER.
Program Edit menu appears.
PR Seek Ch.
07 C07
3. See the descriptions on below to use Program Edit
menu.
b / B (left/right): Moves the cursor to the previous or
next column.
v / V (up/down): Changes the setting at the current
cursor position.
PR: Indicates program number (display only)
Seek: Searches a station automatically. Use
b / B to select Seek option then press v / V.
Searching stops when the recorder tunes in a
station.
Ch.: Changes the channel number to edit. Use b / B
to select Ch. option then press v / V.
MFT: Changes the frequency for fine tuning.
Use b / B to select MFT option then press v / V.
4. Choose OK then press ENTER to confirm the setting
and returns to the Program List menu.
MFT
OK
0
19