Safety; Warning Signs And Labels - Doosan D40S-5 Operation & Maintenance Manual

Safety

The safety rules and regulations in this section are
representative of some, but not all rules and regulations
noted under the Occupational Safety and Health Act
(OSHA) and are paraphrased without representation
that the OSHA rules and regulations have been
reproduced verbatim.
Please refer to 1910. 178 in Federal Register Vol. 37,
No. 202, the National Fire Protection Association No.
505 (NFPA), American National Standard, ANSI B56. 1
Safety Standard for Low lift and High Lift Trucks and
subsequent revisions for a complete list of OSHA rules
and regulations as to the safe operation of powered
industrial lift trucks. Since regulations vary from country
to country outside in U.S.A., operate this lift truck in
accordance with local regulations.
DOOSAN lift trucks are manufactured according to the
regulations and standards laid down in EU Machinery
Directive 98/37/EC and EMC directive 89/336/EC.
Please refer to the Directives 89/655/EC and 89/391/EC
and its amendments for the safe use of DOOSAN lift
trucks.
The most effective method of preventing serious injury
or death to the lift truck operator or others is for the lift
truck operator to be familiar with the proper operation of
the lift truck, to be alert and to avoid actions or
conditions which can result in an accident.
Do not operate a lift truck if in need of repair, defective
or in any way unsafe. Report all defects and unsafe
conditions immediately. Do not attempt any adjustments
or repairs unless trained and authorized to do so.
https://www.forkliftpdfmanuals.com/

Warning Signs and Labels

There are several specific safety signs on your lift truck.
Their exact location and description of the hazard are
reviewed in this section. Please take the time to
familiarize yourself with these safety signs.
Make sure that you can read all warning and instruction
labels. Clean or replace these labels if you cannot read
the words or see the pictures. When cleaning the labels
use a cloth, water and soap. Do not use solvent,
gasoline, etc.
You must replace a label if it is damaged, missing or
cannot be read. If a label is on a part that is replaced,
make sure a new label is installed on the replaced part.
See your dealer for new labels.
Training Required to Operate or Service
Warning
Located on the front side of the FCU.
Improper operation or maintenance could result in
injury or death. Do not operate or work on the lift
truck unless you are properly trained. Read and
understand the Operation and Maintenance Manual.
Additional manuals are available from DOOSAN Lift
Truck dealers.
This label also provides allowable lift truck capacity
information.
-5-
Safety Section
WARNING