Table of Contents
Advertisement
Quick Links
WARRANTY
Each "KUSAM-MECO" product is warranted to be free from
defects in material and workmanship under normal use &
service. The warranty period is one year (12 months) and
begins from the date of despatch of goods. In case any defect
occurs in functioning of the instrument, under proper use,
within the warranty period, the same will be rectified by us
free of charges, provided the to and fro freight charges are
borne by you. This warranty extends only to the original buyer
or end-user customer of a "KUSAM-MECO" authorized dealer.
This warranty does not apply for damaged Ic's, fuses,
disposable batteries, carrying case, test leads, or to any
product which in "KUSAM-MECO's" opinion, has been
misused, altered, neglected, contaminated or damaged by
accident or abnormal conditions of operation or handling.
"KUSAM-MECO" authorized dealer shall extend this warranty
on new and unused products to end-user customers only but
have no authority to extend a greater or different warranty
on behalf of "KUSAM-MECO".
"KUSAM-MECO's" warranty obligation is limited, at option,
free of charge repair, or replacement of a defective product
which is returned to a "KUSAM-MECO" authorized service
center within the warranty period.
THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE
REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. "KUSAM-MECO"
SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES OR
LOSSES, INCLUDING LOSS OF DATA, ARISING FROM
ANY CAUSE WHATSOEVER.
All transaction are subject to Mumbai Jurisdiction.
CLAMP METER
2700 / 2790
AC
DATA HOLD
CLAMP METER
W
DCV
ACV
1000
V
750V
200
200V
200V
mV
200K
200
OFF
COM
VW
!
500V MAX
1000VDC
750VAC
MAX
A
2700
ACA
20A
200A
300A
OFF
Advertisement
Table of Contents
Related Manuals for Kusam-meco 2700
Summary of Contents for Kusam-meco 2700
- Page 1 WARRANTY Each “KUSAM-MECO” product is warranted to be free from defects in material and workmanship under normal use & service. The warranty period is one year (12 months) and CLAMP METER begins from the date of despatch of goods. In case any defect...
-
Page 2: Table Of Contents
TAKE MEASUREMENT CAREFULLY AND YOU’LL Table of Contents SPARE YOUR METER AND YOURSELF, SOME PAIN Title Page Overview ..........Nearly every electrical engineer has a hand held Unpacking Inspection digital clamp meter (Tongtester). We sometimes take them for granted, until we damage them or “burn them Rules For Safe Operation out”. -
Page 3: Overview
Description Qty. the Meter. User Manual Test Lead Digital Clampmeter Model - 2700/2790 1pair (hereafter referred to as “the Meter”) is a 3½ In the event you find any Part missing or digits Clampmeter with steady operations, and damaged, please contact your dealer highly reliable hand-held measuring instrument immediately. -
Page 4: Rules For Safe Operation
Rules For Safe Operation (1) Rules For Safe Operation (2) Warning To avoid possible electric shock or personal Disconnect circuit power and discharge all high injury, and to avoid possible damage to the Meter or to the equipment under test, adhere to the -voltage capacitors before testing resistance, following rules : continuity, diodes, or current. -
Page 5: International Electrical Symbols
The Clampmeter Structure International Electrical Symbols (see figure 1) AC (Alternating Current). DC (Direct Current). Both DC & AC. Grounding. 2700 Double Insulated. CLAMP METER Deficiency of Built-In Battery. Continuity Test. 1000VDC Diode. 750VAC ( Figure 1) Fuse. 1) TRANSFORMER JAWS : Warning! Refer to the Operating Manual. -
Page 6: Functional Buttons
Display Symbols 6) INPUT JACKS (VW and COM) : (see figure 2) Test leads are inserted into these jacks for Voltage, Resistance, Frequency (in Model - 2790) measure- ments and Continuity & Diode Checks. 7) DROP- PROOF WRIST STRAP : Prevents the instrument from slipping off the hand ( Figure 2) while in use. -
Page 7: Measurement Operation
W, kW, W : Ohm. The unit of out measurement. resistance. A. DC voltage measurement (see figure 3) KW : kilohm. 1 x 10 or 1000 ohms. 2700 CLAMP METER ( Figure 3 ) Black 1000VDC 750VAC Warning To avoid harm to you or damages to the Meter from... -
Page 8: Ac Voltage Measurement
& reduce the range step by step until a satisfactory reading is obtained. The LCD displays “ 1 “ indicating the existing ( figure 4) 2700 CLAMP METER selected range is overloaded, it is required to select a higher range in order to obtain a correct reading. -
Page 9: Ac Current Measurement
3) When AC Current measurement has been completed, Open the jaw to remove the conductor & then Switch off the meter. 2700 D. Resistance Measurement (see figure 6) CLAMP METER 1000VDC 750VAC... - Page 10 The test leads can add 0.1W to 0.3W of error to t h e Resistance measurement. To obtain p r e c i s i o n readings in low-resistance, that is the range of 200W, 2700 short-circuit the input terminals before hand & record CLAMP METER the reading obtained (call this reading asX).(X) is...
- Page 11 Connect the test leads to the proper terminals as said above, to avoid error display. The LCD will 2700 CLAMP METER display “1” indicating open-circuit for wrong connection. The unit of diode is Volt (V), displaying the positive connection voltage-drop value.
-
Page 12: General Specifications
2) Set the rotary switch in the Hz range. FEATURES : HIGH - ACCURACY, DIGITAL READING. 3) Connect the test leads across with the object LARGE LCD FOR EASY READING. being measured. The measured value shows on INSTANT CONTINUITY BUZZER. the display. -
Page 13: Electrical Specifications
THRESHOLD < 30W INPUT IMPEDANCE : 10 MW OL - PROTECTION : 1200 VDC/800 VAC ON ALL RANGES. RESPONSE TIME < 100mS DC VOLTAGE(2700) OL - PROTECTION : 500VDC/350VAC. Range Accuracy Resolution FREQUENCY (Autoranging) ± (0.5% rdg + 1 dgt) -
Page 14: Maintenance
Maintenance Warning To avoid false reading, replace the battery as soon as the battery indicator appears. To replace battery : warrantees Disconnect the connection between the testing leads and the circuit under test, and remove the testing leads away from the input terminals of the Meter.
Need help?
Do you have a question about the 2700 and is the answer not in the manual?
Questions and answers