Table of Contents
Advertisement
9. Close the ink tank cover, then close the scanner unit.
10. Follow the on-screen instructions to reset the ink level for the colors you refilled.
Parent topic:
Related concepts
Purchase Epson Ink and Maintenance Box
Maintenance Box Replacement
The maintenance box stores surplus ink that gets flushed from the system during print head cleaning.
When you see a message on the LCD screen, follow the on-screen instructions to replace the
maintenance box.
Note the following precautions when replacing the maintenance box:
• Do not remove the maintenance box or its cover except when replacing the maintenance box;
otherwise, ink may leak.
• Do not touch the green chip on the side of the maintenance box.
• Do not tilt the maintenance box after removing it or ink may leak.
• Do not touch the openings in the maintenance box or you may get ink on you.
• Do not drop the maintenance box or subject it to strong shocks.
• If you cannot replace the cover, the maintenance box may not be installed correctly. Remove and
reinstall the maintenance box.
Refilling Ink
149
- Quick Links:
- Maintenance Box Replacement
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ET-3760 and is the answer not in the manual?
Questions and answers
paper jam but cannot see it and cannot close paper tray
To fix a paper jam in an Epson ET-3760 when it is not visible and the paper tray cannot be closed, follow these steps:
1. Check Paper Tray Settings – Pull out the paper tray, remove the paper, and ensure the blue tabs are correctly adjusted for the paper size. Make sure they are locked in place.
2. Align the Paper Properly – Ensure that the paper in the tray is stacked neatly and mixed with any old paper to prevent misfeeds.
3. Fan the Paper – Before placing the paper back into the tray, fan it to reduce static and separation issues.
4. Look for Hidden Jams – Open the rear access panel and inspect for any stuck paper inside the printer.
5. Restart the Printer – Turn off the printer, unplug it, wait a few minutes, then plug it back in and turn it on to reset any jam detection.
If the issue persists, manually check all accessible areas for any torn paper fragments.
This answer is automatically generated
HOW CAN I UPDATE MY FIRMWARE?