Other Features; Set Alarm Time; Set Sleep Timer; Adjust Display Brightness - Philips 4000 Series User Manual

5

Other features

Set alarm time

Set alarm
Note
•
You can only set the alarm in standby mode.
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold
AL2
for 2 seconds to set alarm time.
2 HR
Press to set hour and
minute, then press
3
Press TUN to select alarm source:
buzzer or your last listened FM station,
AL1
then press or
Tip
•
The unit exits alarm setting mode when being idle for
10 seconds.
Activate/deactivate alarm timer
AL1 AL2
Press or repeatedly to activate or
deactivate the alarm timer.
If the alarm timer is activated, the alarm
indicator turns on.
If the alarm timer is deactivated, the alarm
indicator turns o .
The alarm repeats ringing for the next day.
To stop the alarm, press the coresponding
or .
AL1 AL2
Snooze the alarm
When the alarm sounds, press
The alarm snoozes and repeats ringing 9
minutes later.
6 EN
AL1
MIN
to set
AL1 AL2
or to con rm.
AL2
again to con rm.
.
SNOOZE

Set sleep timer

This clock radio can switch to standby mode
automatically after a preset period.
•
Press
(in minutes).
To deactivate the sleep timer:
•
Press
or
appears.

Adjust display brightness

Press
di erent brightness levels:
•
High
•
Medium
•
Low
Charging device via USB
port
Connect the standard size end of a USB cable
(not included) to the USB Port on back of the
unit and connect the other end to the charging
port on your device.
SLEEP
repeatedly to select a period
The clock radio switches to standby mode
automatically after the preset period.
SLEEP
repeatedly until [ OFF ] (o )
BRIGHTNESS
repeatedly to select