Firmware Upgrade And Calibration; Firmware Upgrade - Zhiyun SMOOTH 5 User Manual

Firmware Upgrade and Calibration

Method 1:
1. Connect the Type-C charging/firmware upgrade port at the side of the
SMOOTH 5 vertical arm to the computer with the USB Type-C USB cable, power
on SMOOTH 5, and enter standby mode.
2. Visit the official website of ZHIYUN (www.zhiyun-tech.com), go to the
SMOOTH 5 product page, click "Download", find the USB driver, the ZHIYUN
calibration upgrade tool, and the firmware and download. (USB drivers are not
required for Mac OS systems)
3. Install the driver and the software, unzip the firmware for the documents with
the ".ptz" file extension.
4. Open "Zhiyun Gimbal Tools", select the corresponding port, click "Open", click
"Firmware Upgrade". Click "Browse" under "Path" to select the latest firmware
downloaded (with the ".ptz" file extension), and click "Upgrade" at the bottom
to upgrade firmware. When the firmware upgrade finishes, SMOOTH 5 will be
automatically turned off.

Firmware Upgrade

Open
Firmware Upgrade
Path:
Upgrade
Browse
19