Table of Contents
Advertisement
Chapter 2 Preparations
1.18
Hard Disk Drive
Expansion Bays for hard disk drives are provided at the front of the server.
A hard disk drive mounted in a dedicated drive tray can be purchased. Install the hard disk drive on the
server with it mounted in the drive tray.
Note the following precautions to install hard disk drives.
•
For onboard connection, hard disk drives having different capacities, types, or rotational speeds cannot
be installed together.
•
In the RAID System, all the hard disk drives in a group (pack) must have the same capacity, type, and
rotational speed.
•
If using hard disk drives in a RAID System, jumper settings or a change of cables may be required.
Bays can accommodate up to 6 hard disk drives (when HDD cage is added, 8 HDDs can be installed).
Port numbers have been assigned to each slot.
<Standard configuration>
Port 0
Port 1
<With 2.5-inch HDD cage installed>
Port 0
Port 1
Important
Use hard disk drives specified by NEC. Installing a third-party hard disk
drive might cause a failure of the server and it.
Port 2
Port 4
Port 3
Port 5
Port 2
Port 4
Port 3
Port 5
Express5800/R120d-1M User's Guide
1. Installing Internal Optional Devices
Port 6
Port 7
93
Advertisement
Table of Contents
