C.A. Technologies Lynx 300H Quick Manual

HVLP AIR CAP AND FLUID NOZZLE CHART
MODEL Press /
AIR CAPS
NO. Siphon
23-1008 pressure
23-1010 pressure
23-1012 pressure
23-1013 pressure
L300H
23-1014 pressure
23-1015 pressure
23-1017 pressure
23-1019 pressure
23-1022 pressure
Actual fluid nozzle and air cap combinations are determined by application (see application chart page 4)
*Note: Air cap test gages are available to confirm HVLP compliance.
*Gun inlet pressures may vary as required by application
**When using optional gun regulator, inlet pressure changes to 45psi
Coating Atomization Technologies 337 South Arthur Avenue, Louisville CO 80027 Phone: 888.820.4498, Fax: 303.438.5708
*MAX GUN
FAN
INLET PRESS.
CONTROL
FOR HVLP
40**
40**
40**
40**
60-1502 (#2)
40**
40**
40**
40**
40**
www.spraycat.com
L L L L L ynx 300H ynx 300H ynx 300H ynx 300H
ynx 300H
PRESSURE FEED SPRAY GUN
SCFM @
AIR CAP
MAX GUN
RING
INLET
13.5 33-0208 0.8mm (.022")
13.5 33-0210 1.0mm (.040")
13.5 33-0212 1.2mm (.046")
13.5 33-0213 1.3mm (.052")
Included
13.5 33-0214 1.4mm (.055")
13.5 33-0215 1.5mm (.059")
13.5 33-0217 1.7mm (.070")
13.5 33-0219 1.9mm (.075")
13.5 33-0222 2.2mm (.086")
PRODUCT INFORMATION
AVAILABLE FLUID
NOZZLES TIPS marking on needle
NEEDLES /
40-1308 (308)
40-1310 (310)
40-1312 (312)
40-1313 (313)
40-1314 (314)
40-1315 (315)
40-1317 (317)
40-1319 (319)
40-1322 (322)