Table of Contents
Advertisement
8.1.2 Scanning by selecting "Output to" and the scan settings from the home screen
8.1.2.1 Basic operation when setting "Output to" settings
Touch the desired output destination.
•
When the home screen is [Home Screen 1]
•
When the home screen is [Home Screen 2]
When the output destination setting screen is displayed, configure the contents displayed on the screen.
In the case of [Email]
•
When specifying a single address:
Touch the address.
•
When specifying multiple addresses:
1.
Touch the icon (
2.
Touch the icon (
–
To add more addresses, repeat this step (up to 5 addresses).
–
To delete the address, touch the icon (
3.
Touch [OK].
•
When specifying the address directly (up to 63 characters):
Touch the icon (
–
For details, refer to "12.2.1 Available characters in Configuration Web" (page 86).
•
When adding addresses to Address Book:
62
).
Touch the icon (
) and select another address.
).
Input the address.
).
Select Address.
).
Touch [OK].
Advertisement
Table of Contents
