Cancelling On/Off Timers; Room Temperature Display / Follow Me; Large Temperature Display; Auto Fresh - Rinnai HSNCJ25B Operation Manual

OPERATION

CANCELLING ON/OFF TIMERS

1� When a timer is set, pressing the "TIMER" button will cancel any timer settings and the timer "OFF" or "ON"
indicator will no longer be shown on the LCD screen.
FOLLOW ME
The remote control is capable of displaying either the set temperature or the
current ambient room temperature at remote control location� The remote control
is capable of measuring the temperature at its current location and sending signal
to appliance 7 times in 2 hours. It enables the appliance to the measure the room
temperature more accurately�
2� To display the current room temperature/active Follow Me function, press
the "FOLLOW ME" button once�
3� "ROOM" is shown on the LCD screen and the temperature digits display the current room temperature at
remote control location�
Pressing the "ROOM" button again, to deactivate this function� The temperature digits display the current set
temperature�
The "SET" temperature display is the default display for the remote control and will be reset when
the controller is turned off and on.
When the room temperature mode is selected any changes to the set temperature will flash
NOTE
on the display for 5 seconds, after which the display will revert to displaying the current room
temperature.

LARGE TEMPERATURE DISPLAY

The set and current room temperatures can be displayed via a large digital display
that is built into appliance and illuminates through the front cover of the indoor unit�
To turn the display on
1� Press the "ON/OFF" button to turn on appliance�
2� Press the "DISPLAY" button, to activate the large digital temperature display.
3� Press the "DISPLAY" button again, to deactivate the large digital temperature
display�
The large temperature display will display the same temperature setting as that currently in use
by remote control.
When the room temperature mode is selected any changes to the set temperature will flash
NOTE
on the display for 5 seconds, after which the display will revert to displaying the current room
temperature.

AUTO FRESH

Cooling and dehumidifying operations, can generate moisture inside the
appliance. Using the "FRESH" function removes such moisture by allowing the
fan to run for 3 minutes after every shut-down, avoiding odours and keeping the
unit fresh�
1� With the appliance "OFF" press the "FRESH" button, "Anti-FUNGUS" is
shown on the LCD screen.
2� Pressing the "FRESH" button again will cancel the mode, "Anti-FUNGUS"
will no longer be shown on the LCD screen.
This function will not operate in TIMER OFF or SLEEP modes.
NOTE
Rinnai 12
Anti-FUNGUS
Split AC OM