Refer to this user manual for more information. Video Tutorials Go to the address below or scan the QR code to watch the DJI RC Pro tutorial videos, which demonstrate how to use the DJI RC Pro safely.
Product Profile Introduction The DJI RC Pro remote controller features O3+, the latest version of DJI’s signature OCUSYNC image transmission technology, and can transmit a live HD view from the camera of an aircraft at a distance of up to 15 km .
Page 6
Outputs sound. 24. Customizable C2 Button Press once to turn the Auxiliary Bottom Light on or off. The function can be set in DJI Fly. 25. Air Intake Used for heat dissipation. DO NOT cover the air intake during use.
Page 8
DJI RC Pro User Manual 3. Log in with your DJI account. If you do not have an account, create a DJI account and log in. 4. Tap “Activate” on the activation page. 5. After activating, select if you would like to join the improvement project. The project helps to improve the user experience by sending diagnostic and usage data automatically every day.
Three preprogrammed modes (Mode 1, Mode 2, and Mode 3) are available and custom modes can be configured in DJI Fly. The default mode is Mode 2. In each of the three pre-programmed modes, the aircraft hovers in place at a constant orientation when both sticks are centered.
Page 11
DJI RC Pro User Manual Center position: control sticks are centered. Moving the control stick: control sticks are pushed away from the center. The figure below explains how to use each control stick. Mode 2 has been used as an example.
Page 12
Do not use other wireless devices operating at the same frequency as the remote controller. Otherwise, the remote controller will experience interference. A prompt will be received in DJI Fly if the transmission signal is weak during flight. Adjust the antennas to make sure that the aircraft is in the optimal transmission range.
Use to adjust the tilt of the gimbal. Rotate the dial clockwise to tilt the gimbal up. Rotate the dial counter clockwise to tilt the gimbal down. Customizable Buttons The customizable buttons include the C1, C2, C3*, and 5D button. Go to System Settings in DJI Fly and select Control to customize the function of the button. 5D button * The ability to customize the C3 button will be supported at a later date.
The remote controller vibrates or beeps when there is an error or warning. Pay attention when prompts appear on the touchscreen or in DJI Fly. Slide down from the top to select Do Not Disturb or Mute to disable some alerts.
Files Firefox Setting Guide 1. Time Displays local time. 2. DJI Fly Tap to enter DJI Fly. 3. Gallery Tap to check stored images and videos. 4. Files Tap to check stored files. 5. Browser Tap to open the browser.
DJI RC Pro User Manual Operations Slide from the left or right to the Slide up from the bottom of the center of the screen to return to screen to return to the home the previous screen. screen. Slide up and right from the bottom...
DJI RC Pro User Manual Shortcut Settings 10:12 Notifications Sat, Mar 30 DJI Fly 11m ago Expore skypixel.com One billion colors captured by the 10-bit Dlog- Wi-Fi Bluetooth Do not distube Record Screen M color profile. Screenshot Mobile Airplane 1. Notifications Tap to check system notifications.
Tap DJI Fly on the home screen to check the flight status and set flight and camera parameters. Since the DJI RC Pro is compatible with multiple aircraft models and the interface of DJI Fly may vary depending on the aircraft model, refer to the DJI Fly app section in the user manual of the relevant aircraft for more information.
Using DJI Fly 1. Power on the remote controller and make sure it is connected to the internet. 2. Run DJI Fly. A prompt will appear when new firmware is available, Tap the prompt to enter the update screen. 3. Update will start automatically after downloading the latest firmware.
Need help?
Do you have a question about the RC Pro and is the answer not in the manual?
Questions and answers