Midi - Boss RC-600 Parameter Manual

MIDI

Parameter Value
1–16
CTL
1–10–16
RX CH RHYTHM
VOICE 1–16
1–16,
TX CH
Specifies the input to which the tempo clock is synchronized.
AUTO
CLOCK
INTERNAL
SYNC
MIDI
USB (AUTO)
OFF, ON
OUT
Specifies what starts in synchronization when a MIDI start message is received.
OFF
START
ALL
RHYTHM
ON
PC OUT OFF,
Specifies the connector(s) from which MIDI messages received at the MIDI IN connector or the USB port are output.
OFF
MIDI IN
THRU MIDI OUT
USB IN
USB OUT
USB & MIDI
Explanation
(Bold: default)
Specifies the receive channel for messages (control changes) that switch memories or
control the RC-600.
Specifies the receive channel for note messages that play the rhythm.
Sets the channel for receiving note messages used by the HARMONIST and VOCODER
effects.
Specifies the MIDI transmit channel.
RX CTL
If this is "RX CTL, " the channel will be the same as the RX CTL CH.
The RC-600 will normally operate using its internal tempo, but will synchronize the tempo
to MIDI clock if MIDI clock data is being input via the MIDI IN connector or the USB port.
Choose the "AUTO" setting if using the RC-600 as a remote device.
The priority order is MIDI > USB > internal clock.
The clock uses the tempo specified by the memory.
Choose the "INTERNAL" setting if you don't want to synchronize the RC-600 to an external
device.
Synchronize to the tempo from the MIDI IN connector.
Synchronize to the tempo from the USB port.
Specifies whether MIDI clock is transmitted (ON) or not transmitted (OFF).
Synchronized start does not occur.
Track + rhythm
Rhythm
Specifies whether program change messages are transmitted (ON) or not transmitted
(OFF).
MIDI messages are not output.
Output from the MIDI OUT connector.
Output from the USB port.
Output from the USB port and the MIDI OUT connector.
System Settings (MENU)
31