Robustel R1500 User Manual
  1. Manuals
  2. Brands
  3. Robustel Manuals
  4. Gateway
  5. R1500
  6. User manual

Robustel R1500 User Manual

Industrial cellular iot gateway
Hide thumbs Also See for R1500:
Table of Contents

Advertisement

Quick Links

Download this manual
User Guide
User Guide
R1500
gateway
Industrial Cellular Iot Gateway
Guangzhou Robustel LTD
RT046_UG_R1500_v.1.0.3
May 28, 2021
1/97
www.robustel.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the R1500 and is the answer not in the manual?

Questions and answers

Related Manuals for Robustel R1500

Summary of Contents for Robustel R1500

  • Page 1 User Guide User Guide R1500 gateway Industrial Cellular Iot Gateway Guangzhou Robustel LTD RT046_UG_R1500_v.1.0.3 May 28, 2021 1/97 www.robustel.com...
  • Page 2 The contents of this document are subject to change without notice due to continued progress in methodology, design and manufacturing. Robustel shall have no liability for any error or damage of any kind resulting from the inappropriate use of this document.
  • Page 3 Robustel accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using the gateway, or for failure of the gateway to transmit or receive such data.
  • Page 4 Protecting Your Gateway To ensure error-free usage, please install and operate your gateway with care. Do remember the following: Do not expose the gateway to extreme conditions such as high humidity / rain, high temperature, direct sunlight,  caustic / harsh chemicals, dust, or water. Do not try to disassemble or modify the gateway.
  • Page 5 People's Republic of China, and can also be used for reference in the logistics process of electronic and electrical products. The orange logo below is used for Robustel products: Indicates its warning attribute, that is, some hazardous substances are contained in the product.
  • Page 6 Table 3: Toxic or Hazardous Substances or Elements with Defined Concentration Limits Name of Hazardous Substances the Part (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) (DEHP) (BBP) (DBP) (DIBP) Metal parts Circuit modules Cables and cable assemblie Plastic polymeric parts Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in RoHS2.0.
  • Page 7 Document History Updates between document versions are cumulative. Therefore, the latest document version contains all updates made to previous versions. Date Firmware Version Document Version Change Description Apr 29, 2019 1.0.0 v.1.0.0 Initial release Jun 10, 2019 1.0.0 v.1.0.1 1. Revise the status of UER in chapter 2.2 LED Indicators.

  • Page 8: Table Of Contents

    Contents Chapter 1 Product Overview ......................... 10 Key Features ............................. 10 Package Contents ............................. 12 Specifications ............................13 Dimensions ............................... 15 Ordering Information ..........................15 Chapter 2 Hardware Installation ........................17 Front panel interface ..........................17 LED Indicators ............................18 Insert or Remove SIM Card ........................
  • Page 9 4.5.6 DDNS ..............................81 4.5.7 SSH ..............................82 4.5.8 Web Server ............................83 4.5.9 Advanced ............................84 System ..............................85 4.6.1 Debug ..............................85 4.6.2 Update .............................. 86 4.6.3 App Center ............................86 4.6.4 Tools ..............................87 4.6.5 Profile..............................90 4.6.6 User Management ..........................

  • Page 10: Chapter 1 Product Overview

    The R1500 uses Robustel self-developed operating system RobustOS. RobustOS is developed on Linux-based systems and is suitable for most of router devices of Robustel. In addition to basic network functions and protocols, the system gives customers a more customized, more convenient and more practical customization experience. At the same time, Robustel will provide SDKs for partners and customers, allowing users to develop their own functions of using C, Python or Java software languages.
  • Page 11 Supports DHCP server  Supports IP Pass-through  Supports RobustVPN cloud platform, providing simple and secure remote access for industrial equipment such as  Supports RobustLink M2M centralized management platform to monitor device network status and statistics  device traffic in real time Supports for firmware upgrades for Web, CLI, USB, SMS and RobustLink ...

  • Page 12: Package Contents

    Terminal block (3.5mm, for power connector)  1 x Quick Start Guide with download link of other documents or tools Note: If any of the above items is missing or damaged, please contact your Robustel sales representative. Optional Accessories (sold separately) ...

  • Page 13: Specifications

     35 mm DIN rail mounting kit  1x serial cable  Cable  AC/DC power adapter (12V DC, 1.5 A; EU/US/UK/AU plug optional) 1.3 Specifications Cellular Interface Number of antennas: 2 ( MAIN + AUX )  Connector: SMA, female ...
  • Page 14 Serial port: Transparent, TCP Client/Server, UDP, Modbus RTU Gateway  App Center (Available Apps for RobustOS) Apps*: Language, RobustLink  *Request on demand. For more Apps please visit www.robustel.com. Power Supply and Consumption Connector: 2-pin 3.5 mm female socket  Input voltage: 9 to 36V DC ...

  • Page 15: Dimensions

    1.4 Dimensions Front view side view Rear view Top & Bottom view 1.5 Ordering Information Model R1500-4L Router Type LTE Gataway Air Interface GSM/WCDMA/FDD LTE/TDD LTE Frequency Bands WCDMA/HSPA/DC-HSPA+ GPRS/EDGE Operating -40 to +75 °C Environment 5 to 95% RH RT046_UG_R1500_v.1.0.3...
  • Page 16 *For more information about frequency bands in different countries, please contact your Robustel sales representative. RT046_UG_R1500_v.1.0.3 May 28, 2021 16/97...

  • Page 17: Chapter 2 Hardware Installation

    5 4 3 2 1 9 8 7 6 Label Name Mark Function Direction Name Mark Function Power Power input R1500 →Device Transmit Data, Signal output interfa positive, 9-36VDC R1500 ←Device Receive Data, Signal input Power Data Terminal Ready, Signal Power input R1500 ←Device...

  • Page 18: Led Indicators

    2.2 LED Indicators Name Color Status Description Green On, solid Power on Green Fast blinking (2Hz) System initializing Initialization completed, device operating Green On, blinking (1Hz) normally Green On, solid Link connection is working Green On, blinking Link connection is communicating Green Link connection is not working Green...
  • Page 19 Please confirm before inserting the SIM card. When the SIM card is turned on and the device is configured without the correct PIN, the SIM card is unavailable. Insert SIM card  Make sure gateway is powered off. To insert SIM card, press the card with finger until you hear a click Remove SIM card ...

  • Page 20: Attach External Antenna (Sma Type)

    2.4 Attach External Antenna (SMA Type) Attach an external SMA antenna to the gateway’s antenna connector and twist tightly. Make sure the antenna is within the correct frequency range provided by the ISP and with 50 Ohm impedance. Note: Recommended torque for tightening is 0.35 N.m. Slave antenna, SMA Main antenna, SMA antenna with a male...

  • Page 21: Connect The Gateway To A Computer

    2.7 Power Supply Power connection diagram R1500 supports reverse polarity protection, but always refers to the figure above to connect the power adapter correctly. There are two cables associated with the power adapter. Following to the color of the head, connect the cable marked red to the positive pole through a terminal block, and connect the yellow one to the negative in the same way.

  • Page 22: Chapter 3 Initial Configuration

    The DTU supports webpage configuration. The supported browsers are IE8.0 or above, Google Chrome, Firefox, etc. The supported operating system is Linux，Mac OS，Windows 98/NT/2000/XP/Me/Vista/7/8 and so on. For R1500, There are several ways to connect to the gateway, either through an external repeater/hub connection or directly to a computer.
  • Page 23 Select "Internet Protocol Version 4 (TCP/IPv4)" and click "Properties". RT046_UG_R1500_v.1.0.3 May 28, 2021 23/97...
  • Page 24 There are two ways to configure the IP address of the PC: Obtain an IP address automatically from the DHCP server and click "Obtain an IP address automatically"; Manually configure the PC with a static IP address on the same subnet as the router address, click and configure "Use the following IP address".

  • Page 25: Factory Default Settings

    Note: If enter the wrong username or password over six times, the login web will be locked for 5 minutes. 3.4 Control Panel After logging in, the home page of the R1500’s web interface is displayed as below: RT046_UG_R1500_v.1.0.3 May 28, 2021...
  • Page 26 In the home page, users can perform operations such as saving the configuration, restarting the router, and logging out. Using the original password to log in the gateway, the page will pop up the following tab Click Symbol to close the popup. It is strongly recommended for security purposes that you change the default username and/or password.
  • Page 27 Note: The steps of how to modify configuration are as bellow: Modify in one page; Click under this page; Modify in another page; Click under this page; Complete all modification; Click RT046_UG_R1500_v.1.0.3 May 28, 2021 27/97...

  • Page 28: Chapter 4 Gateway Configuration

    Chapter 4 Gateway Configuration 4.1 System 4.1.1 System Information This page allows you to view the System Information, Internet Status and LAN Status of your gateway. System Information Item Description Device Model Show the model name of your device. System Uptime Show the current amount of time the gateway has been connected.

  • Page 29: Internet Status

    Internet Status Item Description Active Link Show the current active link. WWAN1 or WWAN2. Uptime Show the current amount of time the link has been connected. IP Address Show the IP address of current link. Gateway Show the gateway address of the current link. Show the current primary DNS server and secondary server.
  • Page 30 General Settings @ Link Manager Item Description Default Primary Link Select from “WWAN1” or “WWAN2”. WWAN1  WWAN1: Select to make SIM1 as the primary wireless link  WWAN2: Select to make SIM2 as the primary wireless link Backup Link Select from “WWAN1”, “WWAN2”, or “None”.
  • Page 31 Click on the right-most of WWAN1/WWAN2 to enter the configuration window. WWAN1/WWAN2 The window is displayed as below when enabling the “Automatic APN Selection” option. The window is displayed as below when disabling the “Automatic APN Selection” option. RT046_UG_R1500_v.1.0.3 May 28, 2021 31/97...
  • Page 32 Link Settings (WWAN) Item Description Default General Settings Index Indicate the ordinal of the list. Type Show the type of the link. WWAN1 Description Enter a description for this link. Null WWAN Settings Automatic APN Click the toggle button to enable/disable the “Automatic APN Selection” Selection option.
  • Page 33 Link Settings (WWAN) Item Description Default Data Allowance Set the monthly data traffic limitation. The system will record the data traffic statistics when data traffic limitation (MiB) is specified. The traffic record will be displayed in Interface > Link Manager > Status > WWAN Data Usage Statistics.
  • Page 34 Status This page allows you to view the status of link connection. Click the right-most button to select the connection status of the current link. Click the row of the link, and it will show the details information of the current link connection under the row. Click the button to clear SIM1 or SIM2 monthly data traffic usage statistics.

  • Page 35: Lan

    Allowance. 4.2.2 LAN This section allows you to set the related parameters of local area network. R1500 has only one LAN network connection ETH0. After ETH0 is restored to factory settings, the default IP is 192.168.0.1/255.255.255.0. Note:Lan0 cannot be deleted.
  • Page 36 The window is displayed as below when choosing “Relay” as the band select type. Item Description Default DHCP Settings Enable Click the toggle button to enable/disable the DHCP feature. mode Select the mode of DHCP from "Server" or "Relay". server ...
  • Page 37 Item Description Default Subnet mask Define the subnet mask of the IP address obtained by the DHCP null client from the DHCP server. DHCP relay agent Enter the IP address of the DHCP relay server. null DHCP Advanced Settings Gateway The gateway assigned to the client by the DHCP server must be on null the same network segment as the DHCP address pool.
  • Page 38 IP address setting project Description default Index Indicate the ordinal of the list. Interface Show the currently edited interface. IP address Set the IP address of the LAN port. null Subnet mask Set the subnet mask of the LAN port. null Status This section allows you to view the status of the cellular connection.

  • Page 39: Ethernet

    4.2.4 Cellular This section allows you to set up the cellular network and related parameters. The R1500 has two SIM card slots, but since it is a single module, it does not support two SIM cards working at the same time. Both the SIM1 card slot and the SIM2 card slot are available when the single SIM card is inserted for the first time.
  • Page 40 Click on the far right of SIM1 To edit the parameters: When "Automatic" is selected for "Network Type", the window looks like this: When "Specify" is selected for "Band Selection", the window looks like this: RT046_UG_R1500_v.1.0.3 May 28, 2021 40/97...
  • Page 41 Cellular Item Description Default General Settings Index Indicate the ordinal of the list. SIM card Show the currently edited SIM card SIM1 telephone Define the phone number of the SIM card. Null number PIN code Enter the PIN code used to unlock the SIM card, 4-8 digits. Null Extra AT Enter additional AT commands for wireless module initialization for expert...
  • Page 42 Cellular Item Description Default Debug Enable Click the toggle button to enable/disable this option. Enable for debugging information output. Detailed Debug Click the toggle button to enable/disable the detailed debug options. Enable Enable link management detailed debugging information output. Click the Status bar to view status information for the cellular network. Click on one of the lines and its detailed status information will be displayed below the current line.
  • Page 43 Cellular Item Description Modem status Show the operating status of the wireless module. Modem model Show the model number of the wireless module. Current SIM card Show the SIM card currently used by the gateway: SIM1 or SIM2. telephone number Show the phone number of the current SIM card.

  • Page 44: Serial Port

    4.2.5 Serial Port This section allows you to set the serial port parameters. R1500 supports two RS232, and both COM1 and COM2 are RS232. Serial port provides a way to transfer serial data to IP data, or vice versa, and transmit these data via wired or wireless network to achieve data transparent transmission.
  • Page 45 The window is displayed as below when choosing “Transparent” as the application mode and “TCP Server” as the protocol. The window is displayed as below when choosing “Transparent” as the application mode and “UDP” as the protocol. The window is displayed as below when choosing “Modbus RTU Gateway” as the application mode and “TCP Client” as the protocol.
  • Page 46 The window is displayed as below when choosing “Modbus RTU Gateway” as the application mode and “UDP” as the protocol. The window is displayed as below when choosing “Modbus ASCII Gateway” as the application mode and “TCP Client” as the protocol. The window is displayed as below when choosing “Modbus ASCII Gateway”...
  • Page 47 Serial Port Item Description Default Serial Port Application Settings Index Indicate the ordinal of the list. Port Show the current serial’s name, read only. Enable Click the toggle button to enable/disable this serial port. When the status is OFF, the serial port is not available. Baud Rate Select from “300”, “600”, “1200”, “2400”, “4800”, “9600”, 115200...
  • Page 48 Serial Port Item Description Default and domain name  TCP Server: Gateway works as TCP server, listening for connection request from TCP client  UDP: Gateway works as UDP client Server Address Enter the address of server which will receive the data sent from Null gateway’s serial port.

  • Page 49: The Internet

    4.2 The internet 4.3.1 Routing A static route is a route based on the destination address. Up to 20 static routes can be added to the router. The routing information protocol, RIP (Route Information Protocol), is widely used in small networks with stable rate changes.

  • Page 50: Firewall

    Click on the "Status" bar to view the routing table status of the device. 4.3.2 Firewall This section is used to set firewall parameters, including setting access controls and adding filtering rules. Filtering rules allow users to customize the acceptance or discard of specified access sources and filter their IP addresses or MAC addresses.
  • Page 51 Click Add filter rules and add up to 50. When the protocol defaults to "All" or selects "ICMP", the window displays as follows (take the "All" protocol as an example): When "TCP", "UDP" or "TCP-UDP" is selected as the protocol, the window is displayed as follows (take the "TCP" protocol as an example): RT046_UG_R1500_v.1.0.3 May 28, 2021...
  • Page 52 filter Option Description default General settings Enable Click the toggle button to enable/disable the default filter rule. You can choose to accept or discard.  Accept: Other accesses are allowed except the filter rule table is Default filtering set to drop access connection requests. accept policy ...
  • Page 53 filter Option Description default Specify an access source and enter itsource address. source address Note: The whitelist is used for HTTPS/HTTP/SSH/Telnet management null and has a higher priority than access control HTTPS/HTTP/SSH/Telnet. Filtering rules index Indicate the ordinal of the list. description Enter a description of this filter rule or MAC binding rule.
  • Page 54 Port mapping rule project Description default index Indicate the ordinal of the list. null description Enter a description of this port mapping. Define a host or network that allows access to the local IP address, null Remote IP address which is unlimited. For example: 10.10.10.10/255.255.255.255 or 192.168.1.0/24 null network port...
  • Page 55 Custom rule Option Description default index Indicate the ordinal of the list. null description Show rule description. null rule Display firewall rules. DMZ (Demilitarized Zone), also known as the demilitarized zone. It is to solve the problem that the access user of the external network cannot access the internal network server after installing the firewall, and set up a buffer between the non-secure system and the security system.

  • Page 56: Ip Passthrough

    4.3.3 IP Passthrough Click Network > IP Passthrough > IP Passthrough, and then click the toggle button to enable or disable the IP Passthrough feature. When the router turns on the IP Passthrough function, the terminal device (such as a PC) will open the DHCP Client mode and then connect to the LAN port of the router.
  • Page 57 General Settings @General project Description default Set the time to live in seconds. The router sends keep-alive packets to Survival time the NAT (Network Address Translation) server at regular intervals to prevent the records on the NAT table from disappearing. Click the toggle button to enable/disable this option.
  • Page 58 General setting @隧道 project Description default index Indicate the ordinal of the list. Enable Click the toggle button to enable/disable this IPsec tunnel. description Enter a description of this IPsec tunnel. null Gateway Enter the remote IPsec VPN server address. 0.0.0.0 means any address. null Optional "tunnel"...
  • Page 59 When the authentication type selects "xAuth PSK", the window is displayed as follows: When the authentication type is selected "xAuth CAWhen the window is displayed as follows: RT046_UG_R1500_v.1.0.3 May 28, 2021 59/97...
  • Page 60 IKE settings project Description default IKE type You can select "IKEv1" and "IKEv2". IKEv1 Select the negotiation mode of IKE (Network Key Exchange) from "Main Mode" and "Savage Mode". If the IP address of an IPsec tunnel is obtained automatically, you must select the aggressive Negotiation mode Main mode mode as the IKE (Network Key Exchange) negotiation mode.
  • Page 61 Local ID type the local ID. If you select this option, you need to remove the default domain name and then enter it, such as test.robustel.com.  User FQDN: Use the user FQDN as the local ID in IKE negotiation; if you select this option, you must bring @, such as test@robustel.com...
  • Page 62 When the protocol in "Virtual Private Network > IPsec > Tunnel > General Settings" selects "AH", the SA settings are displayed as follows: RT046_UG_R1500_v.1.0.3 May 28, 2021 62/97...
  • Page 63 SA settings project Description default When "ESP" is selected in "Protocol", "3DES", "AES192", "AES128" or "AES256" can be selected. Higher security means Encryption more complex implementations and lower rates. DES can meet 3DES Algorithm general needs, and 3DES is chosen for higher security and confidentiality requirements.

  • Page 64: Openvpn

    x509 Option Description default X509 settings Tunnel name Choose a valid tunnel. Tunnel 1 Import the certificate file from the local to the router. The correct certificate file format is as follows: @ ca.crt Local certificate @remote.crt @local.crt @private.key @ crl.pem Peer certificate Select the peer certificate to import to the router.
  • Page 65 Click To add an OpenVPN tunnel, you can add up to five. The mode defaults to "client" and looks like this: When the mode selects "P2P", the window is displayed as follows: When the verification mode is "None", the window is displayed as follows: RT046_UG_R1500_v.1.0.3 May 28, 2021 65/97...
  • Page 66 When "Authentication Mode" selects "Pre-Share Key", the window displays as follows: When the authentication method selects "Password", the window displays as follows: RT046_UG_R1500_v.1.0.3 May 28, 2021 66/97...
  • Page 67 RT046_UG_R1500_v.1.0.3 May 28, 2021 67/97...
  • Page 68 When "X509CA" is selected for "Authentication Method", the window is displayed as follows: When "Authentication Method" selects "X509CA Password", the window displays as follows: RT046_UG_R1500_v.1.0.3 May 28, 2021 68/97...
  • Page 69 OpenVPN project Description default General settings index Indicate the ordinal of the list. Enable Click the toggle button to enable/disable the OpenVPN client. description Enter a description of the OpenVPN. null mode Select "P2P" or "Client". Client Select from "UDP", "TCP Client" or "TCP Server" depending on the protocol application requirements.
  • Page 70 OpenVPN project Description default Server port Enter the listening port of the peer or OpenVPN server. 1194 Select "TUN" or "TAP". The difference between TUN and TAP is that Interface Type the TUN device is a point-to-point virtual device at the network layer, and the TAP is a virtual device at the Ethernet link layer.
  • Page 71 OpenVPN project Description default top of the TLS control channel to protect the link against DoS attacks. Click the toggle button to enable/disable the PKCS#12 certificate. Enable PKS#12 PKS#12, a digital certificate encryption standard used to identify personally identifiable information. Click the toggle button to enable/disablensCertType, which specifies EnablensCertType the server verification mode.

  • Page 72: Gre

    @local.crt @private.key @ crl.pem @ client.p12 null Certificate file Select the certificate file to import to the router. null Private key Select the key to import to the router. null TLS-Auth key selectThe TLS-Auth key is imported to the router. null PKCS#12 certificate selectThe PKCS#12 certificate is imported to the router.
  • Page 73 Tunnel setting @GRE project Description default index Indicate the ordinal of the list. Click the toggle button to enable/disable GRE. GRE (Generic Routing Enable Encapsulation) is a packaged packet protocol to enableIPRouting packets from other protocols in the network. description Enter a description of this GRE tunnel.

  • Page 74: Service

    4.5 Service 4.5.1 Syslog This section allows you to set the syslog parameters. The system log of the gateway can be saved in the local, also supports to be sent to remote log server and specified application debugging. By default, the “Log to Remote” option is disabled.

  • Page 75: Event

    4.5.2 Event This section allows you to set the event parameters. Event feature provides an ability to send alerts by SMS or Email when certain system events occur. General Settings @ Event Item Description Default Signal Quality Threshold Set the threshold for signal quality. Gateway will generate a log event when the actual threshold is less than the specified threshold.
  • Page 76 General Settings @ Notification Item Description Default Index Indicate the ordinal of the list. Description Enter a description for this group. Null Sent SMS Click the toggle button to enable/disable this option. When enabled, the gateway will send notification to the specified phone numbers via SMS if event occurs. Set the related phone number in “3.14 Services >...
  • Page 77 Phone Number Enter the phone numbers used for receiving event notification. Use a semicolon (;) Null to separate each number. Send Email Click the toggle button to enable/disable this option. When enabled, the gateway will send notification to the specified email box via Email if event occurs. Set the related email address in “3.14 Services >...

  • Page 78: Ntp

    4.5.3 NTP This section allows you to set the related NTP (Network Time Protocol) parameters, including Time zone, NTP Client and NTP Server. Item Description Default Timezone Settings Time Zone Click the drop down list to select the time zone you are in. UTC +08:00 Expert Setting Specify the time zone with Daylight Saving Time in TZ environment...

  • Page 79: Sms

    4.5.4 SMS This section allows you to set SMS parameters. Gateway supports SMS management, and user can control and configure their gateways by sending SMS. SMS Management Settings Item Description Default Enable Click the toggle button to enable/disable the SMS Management option. Note: If this option is disabled, the SMS configuration is invalid.

  • Page 80: Email

    SMS Testing Item Description Default Phone Number Enter the specified phone number which can receive the SMS from gateway. Null Message Enter the message that gateway will send it to the specified phone number. Null Result The result of the SMS test will be displayed in the result box. Null Click the button to send the test message.

  • Page 81: Ddns

    4.5.6 DDNS This section allows you to set the DDNS parameters. The Dynamic DNS function allows you to alias a dynamic IP address to a static domain name, allows you whose ISP does not assign them a static IP address to use a domain name.

  • Page 82: Ssh

    DDNS Status Item Description Status Display the current status of the DDNS. Last Update Time Display the date and time for the DDNS was last updated successfully. 4.5.7 SSH Gateway supports SSH password access and secret-key access. SSH Settings Item Description Default Enable...

  • Page 83: Web Server

    4.5.8 Web Server This section allows you to modify the parameters of Web Server. General Settings @ Web Server Item Description Default HTTP Port Enter the HTTP port number you want to change in gateway’s Web Server. On a Web server, port 80 is the port that the server "listens to" or expects to receive from a Web client.

  • Page 84: Advanced

    4.5.9 Advanced This section allows you to set the reboot. Periodic Reboot Settings Item Description Default Device name Set the name of the router to distinguish other installed devices. router Custom LED light Select from “None, SIM, NET, OpenVPN, or IPsec.” None ...

  • Page 85: System

    4.6 System 4.6.1 Debug This section allows you to check and download the syslog details. Click Service > System Log > System Log Settings to open the system log. Syslog Item Description Syslog Details Log Level Select from “Debug”, “Info”, “Notice”, “Warn”, “Error” which from low to high. The lower level will output more syslog in detail.

  • Page 86: Update

    Refresh Select from “Manual Refresh”, “5 Seconds”, “10 Seconds”, “20 Seconds” or “30 Seconds”. You can select these intervals to refresh the log information displayed in the follow box. If selecting “manual refresh”, you should click the refresh button to refresh the syslog. Click the button to clear the syslog.

  • Page 87: Tools

    App Center Item Description Default App Install File Click on “Choose File” to locate the App file from your computer, and then click to import this file into your gateway. Note: File format should be xxx.rpk, e.g. M1200-robustlink-1.0.0.rpk. Installed Apps Index Indicate the ordinal of the list.
  • Page 88 Timeout Specify the timeout of ping requests. Local IP Specify the local IP from cellular WAN, Ethernet WAN or Ethernet LAN. Null Null stands for selecting local IP address from these three automatically. Click this button to start ping request, and the log will be displayed in the Null follow box.
  • Page 89 Sniffer Item Description Default Interface Select the interface according to the "Ethernet" configuration and select from "All", "PPP1", "WWAN" and "IO". Host Filter the packet that contain the specify IP address. Null Packets Request Set the packet number that the gateway can sniffer at a time. 1000 Protocol Select from “All”, “IP”, “TCP”, “UDP”...

  • Page 90: Profile

    4.6.5 Profile This section allows you to import or export the configuration file, and restore the gateway to factory default setting. Profile Item Description Default Import Configuration File Reset Other Settings to Click the toggle button as “ON” to return other parameters to default Default settings.

  • Page 91: User Management

    Rollback Item Description Default Configuration Rollback Save as a Rollbackable Create a save point manually. Additionally, the system will create a save Archive point every day automatically if configuration changes. Configuration Archive Files Configuration Archive View the related information about configuration archive files, including Files name, size and modification time.
  • Page 92 Click button to add a new common user. The maximum rule count is 5. Common User Settings Item Description Default Index Indicate the ordinal of the list. Role Select from “Visitor” and “Editor”. Visitor  Visitor: Users only can view the configuration of gateway under this level ...

  • Page 93: Glossary

    Glossary Abbr. Description Alternating Current Access Point Name of GPRS Service Provider Network Conformité Européene (European Conformity) CHAP Challenge Handshake Authentication Protocol Circuit Switched Data Clear to Send Decibel Decibel Relative to an Isotropic radiator Direct Current Data Carrier Detect Data Communication Equipment DCS 1800 Digital Cellular System, also referred to as PCN...
  • Page 94 Abbr. Description Point-to-point Protocol Personal Identity Number Power Supply Unit Personal Unblocking Key R&TTE Radio and Telecommunication Terminal Equipment Radio Frequency Request to Send Receive Direction Subscriber Identification Module Subminiature Version A RF Connector Short Message Service TCP/IP Transmission Control Protocol / Internet Protocol Terminal Equipment, also referred to as DTE Transmit Direction UART...
  • Page 95 Guangzhou Robustel LTD Add: 3rd Floor, Building F, Kehui Park, No.95 Daguan Road, Guangzhou, China 510660 Tel: 86-20-82321505 Email: info@robustel.com Web: www.robustel.com RT046_UG_R1500_v.1.0.3 May 28, 2021 95/97...

This manual is also suitable for:

R1500-4l

Table of Contents