Summary of Contents for Reebok Pilates Ultimate Reformer
Page 1
Model No. RBBE19520 Serial No. USER’S MANUAL Write the serial number in the space above for future reference. Serial Number Decal (Under Seat) QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you have questions, or if there are missing or damaged parts, we will guarantee complete satisfac- tion through direct assistance...
For a great selection of new CD and MP3 workouts Visit our website at www.iFIT.com or call 1-800-215-7643 REEBOK and the Vector Logo are registered trademarks and service marks of Reebok. This product is manufactured and distributed under license from Reebok International.
ASSEMBLY • As you assemble the exercise bench, make sure Make Things Easier for Yourself all parts are oriented as shown in the drawings. Everything in this manual is designed to ensure • Assembly requires two people. that the exercise bench can be assembled suc- cessfully by anyone.
Page 5
3. Insert the Foot Bar (32) into the end of the Inner Frame (2). Attach two Cap Legs (14) to the ends of the Foot Bar. 4. Rest the exercise bench on its side for this step. Attach the short ends of the two Headrest Frames (7) to the bottom of the Carriage (6) with four M6 x 18mm Screws (36).
Page 6
6. Tighten the two Carriage Tubes (11) into the holes in the Carriage (6). Slide a Shoulder Block (10) onto each Carriage Tube (11). 7. Pull the Adjustment Knob (17) out of the Inner Frame (2). Slide the Inner Frame out of the Outer Frame (1) and engage the Knob into the adjust- ment hole in the Inner Frame.
Page 7
9. Orient the two Pulley Housings (26) as shown. Slide the Eyebolt/Pins (51, 52) into a set of holes in the Pulley Tubes (12). Route the two Nylon Ropes (23) through the Pulley Housings (26) as shown. 10. Insert the square tips on the two Rope Storage Knobs (31) into the square holes in the Carriage Plates (49, not shown).
ADJUSTMENTS This section explains how to adjust the exercise bench. Refer to the accompanying exercise guide and video to see the correct form for each exercise. Make sure that all parts are properly tightened each time you use the exercise bench. Replace any worn parts immediately.
Page 9
ADDING RESISTANCE To add resistance to the movement of the Carriage (6), engage a Resistance Cord (22) to the Resistance Bracket (21) on the Inner Frame (2). To add more resistance, engage more Resistance Cords to the Bracket. STORING THE BENCH The exercise bench can be shortened when not in use.
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be pre- pared to give the following information: 1. the MODEL NUMBER of the product (RBBE19520) 2. the NAME of the product (REEBOK PILATES ULTIMATE REFORMER exercise bench) ®...
Need help?
Do you have a question about the Pilates Ultimate Reformer and is the answer not in the manual?
Questions and answers