Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for TACKLIFE PES03A
Summary of Contents for TACKLIFE PES03A
- Page 1 User Manual Circular Saw PES03A...
-
Page 5: Proper Usage
1. Proper usage a) Keep work area clean and well lit. Cluttered or dark areas invite accidents. • The machine is intended for lengthways and b) Do not operate power tools in explosive crossways cutting of wood with straight cutting atmospheres, such as in the presence of lines as well as mitre cuts in wood while resting flammable liquids, gases or dust. - Page 6 3) Personal safety a) Do not force the power tool. Use the correct power tool for your application. The correct a) Stay alert, watch what you are doing and power tool will do the job better and safer at the use common sense when operating a power rate for which it was designed.
-
Page 7: Special Safety Instructions
power tool is maintained. performance and safety of operation. 4. Special safety instructions • Causes and operator prevention of kickback: – Kickback is a sudden reaction to a • DANGER: Keep hands away from cutting area pinched, bound or misaligned saw blade, and the blade. - Page 8 released. For all other sawing, the lower guard restarted. should operate automatically. • Support large panels to minimise the risk of • Always observe that the lower guard is blade pinching and kickback. Large panels covering the blade before placing saw down tend to sag under their own weight.
-
Page 9: Description Of Symbols
over the power tool. 5. Description of symbols • Never use the machine with a damaged cable. Pay attention to all the signs and symbols shown Do not touch the damaged cable and pull the in these instructions and on your tool. mains plug when the cable is damaged while Make a note of these signs and symbols. -
Page 10: Before Starting The Equipment
6. Layout • Place the saw foot (6) flat on the surface of the workpiece you wish to saw. Raise the saw until the saw blade (12) is at the required cutting depth 1. Handle (a). 2. ON/OFF switch 3. Locking button for ON/OFF switch •... -
Page 11: Operation
• Loosen the locking screw for the parallel stop (8) • Do not use any flanges / flange nuts whose bore on the saw foot (6). hole is larger or smaller than those in the saw blade. • To assemble, slide the parallel stop (16) into the •... - Page 12 Important. The hand-held circular saw must not be operated with the saw blade key (13) inserted • Hold the circular saw firmly with both hands. in it. 8.3 Switching ON/OFF (Fig. 7) • Undo the screw to secure the saw blade (17) using the saw blade key (13).
-
Page 13: Replacing The Power Cable
9. Replacing the power cable • Only use appliances which are in perfect working order. If the power cable for this equipment is damaged, • Service and clean the appliance regularly. it must be replaced by the manufacturer or its aftersales service or similarly trained personnel to •... -
Page 14: Environmental Protection
require additional maintenance. 12. Repairs Only use accessories and spare parts recommended by the manufacturer. If the equipment should fail some day in spite of our quality controls and your maintenance, only have it repaired by an authorized electrician. If the supply cord of the appliance is damaged, this has to be done by the manufacturer or his agent or electrician in order to avoid a safety hazard. -
Page 15: Warranty Registration
Warranty Registration We are glad to invite to register the warranty information at www.tacklifetools.com.After registration,you may kindly enjoy the exclusive service...
Need help?
Do you have a question about the PES03A and is the answer not in the manual?
Questions and answers