Setting Bpm Manually (Tap Mode) - PIONEER DJ Serato XDJ-RX3 Instruction Manual

• To use the X-PAD, touch [BEAT FX] on the waveform screen to display the Beat FX
controls.
1. BEAT FX
X-PAD : Touch to turn an effect on and off. You can adjust the time and quantitative
2.
parameters when you touch or slide your finger on X-PAD.

Setting BPM manually (Tap mode)

1 Tap the [TAP (AUTO)] button more than twice in time with the
beat of the track.
BPM is set according to the average time between taps.
• The beat fraction is set to 1/1 when you set BPM with the [TAP (AUTO)] button, and
the length of one beat is set as the effect time.
• Turn the [TIME] knob while pressing the [TAP (AUTO)] button to adjust BPM in increments
of 1.
• Press the [BEAT
BPM in increments of 0.1.
• Press the [TAP (AUTO)] button while pressing the [SHIFT] button to automatically set the
BPM.
] or [BEAT ] button while pressing the [TAP (AUTO)] button to adjust
102
Beat FX
1
2