5. IInstall the M.2 solid-state drive.
6. Close the retention latch.
7. Reinstall all removed parts.
Rear Wi-Fi antenna cable
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Removal steps
1. Remove the computer cover. See "Computer cover" on page 67.
2. Remove the hard disk drive, if any. See "Hard disk drive and hard disk drive bracket" on page 69.
3. Remove the Wi-Fi card and Wi-Fi card shield. See "Wi-Fi card and Wi-Fi card shield" on page 75.
4. Remove the rear Wi-Fi antenna cable.
.
Chapter 6
Hardware removal and installation
81