Table of Contents
Advertisement
Quick Links
QUICK START GUIDE
FEATURES
• 1/3" Megapixel Progressive Scan CMOS image sensor
• Up to 30fps live view
• 3.3~12mm Varifocal Lens (VTC-TNB36R3V2) / 3.6mm Fixed
Iris Lens, 2.8mm Also Available (VTC-TNB42R3F2 & VTC-
TNB42R4F2)
• 36 Infrared LED's with 120' IR Range (VTC-TNB36R3V2) / 42
Infrared LED's with 150' IR Range (VTC-TNB42R3F2 & VTC-
TNB42R4F2)
• 120dB Super Wide Dynamic Range (WDR)
• True Mechanical Day/Night function by ICR
• XD-DNR (2D-DNR & 3D-DNR) Noise Reduction
• On Board Motion Detection
• H.265/H.264/MJPEG Triple Streaming
• Secondary Video Output (CVBS)
• Remote Viewing via CMS, Internet Explorer, and iOS & Android
Apps
• Minimal Latency with up to 10 simultaneous user connections
• ONVIF Compliant
• IP66 Weather Resistance
• Optional Junction Box Mount Available (VT-TJB01)
• 12VDC & PoE (Power over Ethernet) Operation
VTC-TNB36R3V2
VTC-TNB42R3F2
VTC-TNB42R4F2
3.0 & 4.0 Megapixel Indoor/Outdoor
WDR IP IR Bullet Cameras
PLEASE NOTE:
Complete User Guide, Software, Tools, and Updates are
available online. Scan the QR Code or visit:
http://www.vitekcctv.com/Downloads
Advertisement
Table of Contents
Related Manuals for Vitek VTC-TNB36R3V2
Summary of Contents for Vitek VTC-TNB36R3V2
- Page 1 • 3.3~12mm Varifocal Lens (VTC-TNB36R3V2) / 3.6mm Fixed Iris Lens, 2.8mm Also Available (VTC-TNB42R3F2 & VTC- TNB42R4F2) • 36 Infrared LED’s with 120’ IR Range (VTC-TNB36R3V2) / 42 Infrared LED’s with 150’ IR Range (VTC-TNB42R3F2 & VTC- TNB42R4F2) • 120dB Super Wide Dynamic Range (WDR) •...
- Page 2 This camera series supports both fixed and varifocal lenses. Please note that the zoom and focus features mentioned below are only available on the varifocal lens version. Mount Lock Power Cable Lens Cover Mount Base RJ-45 Ethernet Zoom* CVBS Output Focus* Audio Input *VTC-TNB36R3V2 Only...
- Page 3 Cable Connections First connect the Waterproof Cap to an Ethernet patch cable, then connect the cameras ethernet adaptor. If not powering the camera with PoE, also connect the power Cable to an approved 12VDC Power Supply. Network Cable 12VDC Optional 12VDC Power Connection.
- Page 4 Installation Before beginning installation, make sure that the wall or ceiling is strong enough to withstand 3 times the weight of the camera. The mounting steps are as follows: 1. Attach the drill template to the place where you want to install the camera, then drill 3 screw holes and 1 cable hole (if you want to route the...
- Page 5 360° Pan 90° Tilt 4. To adjust the lens, start by removing the Lens Cover, then adjust the Focus and Zoom levers to achieve a clear image. Replace the Lens Cover. *VTC-TNB36R3V2 Only. Lens Cover Zoom Focus 5. Carefully remove the protective film from the lens to complete the...
- Page 6 LAN Configuration The camera can be accessed on the local network either using the IP-Tool or directly in a web browser. 1. Attach the drill template to the place where you want to install the camera, then drill 3 screw holes and 1 cable hole (if you want to route the cables through the mounting base) according to the drill template Accessing the Camera Using the IP-Tool...
- Page 7 4. Double-click the IP address and then the system will pop up the web browser to connect IP-CAM . IE browser will download the Active X control automatically. After downloading, a login window will pop up as shown below: Input the user name and password to log in. Default user name: admin / Default password: 123456.
- Page 8 2. Open the IE Browser and input the default address of IP-CAM and confirm. The IE browser will download Active X control automatical- 3. After downloading Active X control, the login dialog box will pop up. 4. Input the default username and password and then enter to view. WAN Configuration Access the camera by the router or virtual server for example.
Need help?
Do you have a question about the VTC-TNB36R3V2 and is the answer not in the manual?
Questions and answers