Summary of Contents for Xycom 9485
- Page 1 9485/9487 24 VDC Power Supply P/N 128418-001A 1998 XYCOM, INC. Printed in the United States of America...
- Page 2 Brand or product names are registered trademarks of their respective owners. Copyright Information This document is copyrighted by Xycom Incorporated (Xycom) and shall not be reproduced or copied without expressed written authorization from Xycom. The information contained within this document is subject to change without notice.
- Page 3 9485/9487 manual. If this equipment has more than one connector, do not leave cables connected to unused interfaces. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the...
- Page 5 DC input power. The factory-installed power sup- ply module provides +5 V, +12 V, and -12 V outputs. Figure 1 provides a side view of a 9485/9487 unit with a DC power supply installed. Figure 1. Internal View of 9485/9487...
- Page 6 Line Voltage Considerations The 9485/9487 DC power supply is built to sustain line fluctuations of 20 - 25 VDC and still allow the system to function within its operating margin. As long as the in- coming voltage is adequate, the power supply provides all the logic voltages neces- sary to support the processor, memory, and I/O.
- Page 7 For continued protection against fire hazard, you must replace the fuse with one of the same type and rating. Creating a Power Cable You must create a power cable to supply power to the 9485/9487. You need the fol- lowing materials: •...
- Page 8 9485/9487 DC Power Supply Agency Approvals The 9485/9487 industrial computer has the following agency approvals: 1950 C22.2 No. 950 EN 60950 Regulatory Compliance 89/336/EEC EN55022:1994, Class A EN50082-2:1995 73/23/EEC Low-voltage Directive 47 CFR Part 15, Class A...
Need help?
Do you have a question about the 9485 and is the answer not in the manual?
Questions and answers