•
Connect the faucet shank to inlet supply lines (N). Connect the supply stops
(O) to the inlet supply lines (N) (left is hot water supply and right is cold water
supply). Make sure inlet supply lines (N) are securely tighten. Do not overtight-
en.
•
Turn on water. Check for any leaks. Make sure all the connections are secure.
•
Remove aerator (P).
•
Open the handle.
•
Flush and allow water to run at full flow for at least one minute.
•
Replace aerator (P).
For more care information or trouble shooting inquiries about your
Pioneer product, please see the contact information on the back page.
Main Supply Connection
5