Livox AVIA Quick Start Manual page 9

Livox Avia Quick Start Guide
Connecting the Livox Avia
The Livox Avia supports two IP modes: dynamic IP address mode and static IP address
mode. All Livox Avia LiDAR sensors are set to static IP address mode by default with an
IP address of 192.168.1.1XX (XX stands for the last two digits of the Livox Avia LiDAR
sensor's serial number). The default subnet masks of the Livox Avia LiDAR sensors are all
255.255.255.0, and their default gateways are 192.168.1.1. Directly connect the Livox Avia to
the computer when using for the first time.
1. Before connecting, set the IP address of the computer to static IP address mode. Set
the IP address of the computer to 192.168.1.50, and the subnet mask of the computer to
255.255.255.0.
2. Connect the Livox Avia as shown below.
a. Connect the Livox Avia to the conversion cable. Next, connect the conversion cable to
the Livox Converter 2.0.
b. Connect the computer and the Livox Converter 2.0 using an Ethernet cable.
c. Connect the Livox Converter 2.0 to an external power source.
• Refer to the Livox Avia User Manual on how to connect the Livox Avia to a router
supporting the Dynamic Host Configuration Protocol (DHCP).
• Refer to the Livox Avia User Manual on how to set the IP address of the computer.
• When multiple Livox Avia LiDAR sensors are connected to one computer in static IP
address mode, make sure all sensors connected have different static IP addresses.
Refer to Livox Avia User Manual for more information on how to set the IP address for
each LiDAR sensor.
• The working voltage of the Livox Converter 2.0 is 9 to 30 V. Therefore, when connecting
the Livox Avia to an external power source using a Livox Converter 2.0, the supported
voltage range of the external power source is from 9 to 30 V. The working voltage of the
Livox Avia, however, is 10 to 15 V. If a Livox Avia is directly connected to an external
power source, make sure the voltage range of the power source is within the allowable
range. Make sure the positive and negative ends of the power cable are connected
correctly.
8
Livox Avia
Ethernet Cable
External Power Source
Conversion Cable
Livox Converter 2.0