Table of Contents
Advertisement
Mainboard removal and installation
To remove the mainboard, follow these steps:
1.
Power down the server and unplug the power cord.
2.
Remove the server node (see "Replacing a server node" on page 41).
3.
Remove all installed PCI Express cards (see "PCI Express card removal and installation" on page
42).
4.
Remove the riser card module (see "Replacing the riser card module" on page 43).
5.
Remove the cover plate (see "Removing the cover plate" on page 45).
6.
Remove the air shroud (see "Removing the air shroud" on page 46).
7.
Remove the heatsink (see "Heatsink removal and installation" on page 47).
8.
Remove the CPU (see "CPU removal and installation" on page 49).
9.
Remove the memory (see "Memory removal and installation" on page 51).
10. Remove the five screws (
board to the server node tray.
11. Pull out the mainboard and SATA board (
56
) that secure the mainboard and the four screws (
) from the server node tray.
) that secure the SATA
.
Chapter 7
Advertisement
Table of Contents
