Acer ARMC User Manual page 136

ARMC Card Flash Utility,
Step Description
1 Left click the Card Settings button to begin.
2 The Active Cards in Recovery Mode screen appears and starts to search for ARMC cards in Recovery
Mode.
Left click the ARMC card's MAC address that you want to configure.
The Active Cards in Recovery Mode buttons are explained in the table below:
Button Description
Stop The Stop button allows you to stop searching the network for active cards in Recovery
Mode.
Refresh The Refresh button allows you to start searching the network again for ARMC cards'
MAC addresses in Recovery Mode.
Select The Select button allows you to specify the highlighted ARMC card's settings. You can
specify the ARMC card's, IP, Network Mask, and Gateway addresses as shown in the
following step.
Cancel The Cancel button allows you to cancel any new settings that are not saved.
126 Acer Remote Management Card (ARMC) User's Guide
Continued
Cont'd