Sealey FWB1 Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND
CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY
CAUSE DAMAGE OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
3 Maintain the workbench in good condition. Replace or repair damaged parts. Use recommended parts only. Non authorised parts may
be dangerous and will invalidate the warranty.
3 Keep the workbench clean for best and safest performance and check moving parts alignment regularly.
3 Locate the workbench in an adequate working area for its function, keep area clean and tidy and ensure there is adequate lighting.
3 Ensure the workpiece is correctly secured before operating the workbench.
3 Ensure that any workpiece which extends beyond the bench centre of gravity is adequately supported.
3 Maintain correct balance and footing. Ensure the floor is not slippery and wear non slip shoes.
7 DO NOT use the workbench for any purpose other than for which it is designed.
7 DO NOT get the workbench wet or use in wet weather conditions, and DO NOT expose the workbench to excessive heat.
7 DO NOT operate the workbench if any parts are missing as this may cause failure or possible personal injury.
7 DO NOT stand on the top of workbench, or use it as standing platform or to support a platform. The workbench is for clamping items only.
3 When not in use store in a safe, dry, child proof area and ensure it will not tipple over.
2. ASSEMBLY
Unpack the product and check contents to ensure no parts are damaged. Should there be any damaged or missing parts contact your supplier
immediately. Follow the step by step illustrations to assembly your bench.
STEP 1
STEP 2
INSTRUCTIONS FOR:
FOLDING WORKBENCH
FWB1
Model No:
STEP 3
FWB1 - 0021 - 051198 issue 2