Advertisement
VMG4927-B50A
Dual-Band Wireless AC/N
VDSL2 Bonding Gateway
Quick Start Guide
Step 1
Hardware Installation
4
POWER
WAN
1-b
OR
1-a
DSL
Green
POWER
Green
INTERNET
------
Step 2
WiFi Connection
Using SSID
1
2
1/2
(Optional)
USB
3
(Optional)
2
ETHERNET
OR
On
- Power is on.
On
- Internet is ready.
Off - Internet is not ready.
WiFi Network Name(SSID):
Zyxel_xxxx
WiFi Security Type :
WPA2-PSK
WiFi Password :
XXXXXXXXXX
WiFi
SSID
Zyxel_xxxx
Zyxel_xxxx
OR
Password
Wireless key
XXXXXXXXXX
XXXXXXXXXX
See the User's Guide at www.zyxel.com for more information,
including customer support and safety warnings.
EU Importer
Zyxel Communications A/S
Gladsaxevej 378, 2. th. 2860 Søborg, Denmark
http://www.zyxel.dk
US Importer
Zyxel Communications, Inc
1130 North Miller Street Anaheim, CA 92806-2001
http://www.us.zyxel.com
Copyright © 2018 Zyxel Communications Corp. All Rights Reserved.
EN
1
Use the gray phone cable to connect the DSL port to a DSL splitter (1-a) or directly to
the telephone wall outlet.
OR
Use an Ethernet cable to connect the WAN port to a gateway modem (1-b).
2
Connect a computer to the LAN port using the yellow Ethernet cable (optional).
3
Connect a USB memory stick for file sharing (optional).
4
Connect the power adapter.
EN
Using SSID
The SSID and Wireless key are on the device label.
1
2
On your smartphone or notebook, find this SSID. Enter the WiFi Password to connect.
Advertisement
Table of Contents
Related Manuals for ZyXEL Communications VMG4927-B50A
Summary of Contents for ZyXEL Communications VMG4927-B50A
- Page 1 1130 North Miller Street Anaheim, CA 92806-2001 Quick Start Guide http://www.us.zyxel.com Copyright © 2018 Zyxel Communications Corp. All Rights Reserved. Step 1 Hardware Installation Use the gray phone cable to connect the DSL port to a DSL splitter (1-a) or directly to the telephone wall outlet.
- Page 2 • If you changed the IP address, use the new IP address. for further information. • If you changed the IP address and have forgotten it, you have to reset the VMG4927-B50A to its factory • Make sure to connect the cables to the correct ports.
Need help?
Do you have a question about the VMG4927-B50A and is the answer not in the manual?
Questions and answers
how to extend the wifi signal from the Zyxel 4927-B50A it works fine except have an exterior thermometer that doesn't stay connected. Is there a extender that will cover the weaker area?
To extend the WiFi signal from the ZyXEL VMG4927-B50A:
1. Connect a Multy-Pro-supported extender to the VMG4927-B50A using an Ethernet cable.
2. Turn on the extender.
3. Enable Zyxel MESH in the Web Configurator: go to Network > Wireless > MESH.
4. If the extender is in repeater mode, make sure WiFi is enabled.
5. Press and hold the WPS button on the VMG4927-B50A for more than five seconds, or click "Add Extender" in the Multy Pro App.
This setup allows the extender to work with the VMG4927-B50A to cover weak WiFi areas.
This answer is automatically generated