Related Manuals for Intel NUC Kit NUC8i7BEH
Summary of Contents for Intel NUC Kit NUC8i7BEH
- Page 1 User Guide for NUC8i7BEH, NUC8i5BEH, NUC8i3BEH Intel® NUC Kit NUC8i7BEH Intel® NUC Kit NUC8i5BEH Intel® NUC Kit NUC8i5BEHS Intel® NUC Kit NUC8i3BEH Intel® NUC Kit NUC8i3BEHS User Guide...
-
Page 2: Before You Begin
If such a station isn’t available, you can provide some ESD protection by wearing an antistatic wrist strap and attaching it to a metal part of the computer chassis. Installation Precautions When you install and test the Intel NUC, observe all warnings and cautions in the installation instructions. To avoid injury, be careful of: •... -
Page 3: Open The Chassis
Install an operating system • Install the latest device drivers and software • Open the Chassis To open the Intel NUC chassis, follow these steps: 1. Unscrew the four corner screws on the bottom cover of the chassis and lift the cover. -
Page 4: Installing And Removing Memory
User Guide for NUC8i7BEH, NUC8i5BEH, NUC8i3BEH Installing and Removing Memory Intel NUC Kits NUC8i7BEH, NUC8i5BEH, and NUC8i3BEH have two 260-pin DDR4 SO-DIMM sockets. Be sure to select memory modules that meet these requirements: • 1.2V low voltage memory • 2400 MHz SO-DIMMs •... - Page 5 7. Replace the computer’s cover and reconnect the power cord. Install an M.2 SSD or Intel® Optane™ Memory Module The Intel NUC Kits NUC8i7BEH, NUC8i5BEH, and NUC8i3BEH support an 80mm or 42mm SSD. Find compatible M.2 SSDs in the Intel Product Compatibility Tool •...
- Page 6 User Guide for NUC8i7BEH, NUC8i5BEH, NUC8i3BEH Install a 2.5” SSD or Hard Drive The Intel NUC Kits NUC8i7BEH, NUC8i5BEH, and NUC8i3BEH support an additional 2.5” Solid State Drive (SSD) or Hard Disk Drive (HDD). Find compatible 2.5” drives in the Intel Product Compatibility Tool: •...
-
Page 7: Close The Chassis
Set the drive bay bracket down inside the chassis (C). Close the Chassis After all components have been installed, close the Intel NUC chassis. Intel recommends this be done by hand with a screwdriver to avoid over-tightening and possibly damaging the screws. - Page 8 1. Using the four small black screws that were included in the box, attach the VESA bracket to the back of the monitor or TV. 2. Attach the two slightly larger black screws to the bottom chassis cover of the Intel NUC. 3. Slide the Intel NUC onto the VESA mount bracket.
-
Page 9: Connect Power
Connect Power Country-specific power cords are included in the Intel NUC Kit box. Connect AC power Each Intel NUC model includes either a region-specific AC power cord or no AC power cord (only the power adapter). Product codes Power cord type BOXNUC8i7BEH No power cord included. -
Page 10: Install An Operating System
Install an Operating System Refer to Supported Operating Systems for a list of Intel-validated Windows* operating systems and versions of Linux that have been reported as compatible by Intel NUC owners. Refer to Operating System Installation for system requirements and installation steps.
Need help?
Do you have a question about the NUC Kit NUC8i7BEH and is the answer not in the manual?
Questions and answers