Openplan Systems XPAND REACH Assembly Instructions Manual page 8

Step 14: To Build a Single bench,
attach the Leg Assembly (XP-LA)
to the Leg Rail (XP-LR-XX) using
(2) XP-Screws.
Step 15: Attach another Leg Assembly
to the other end of the Leg Rail using
(2) XP-Screws.
Step 17: Assemble the Stretcher Bar (XP-SB-XX) to the XP-SB-Bracket using (2) XP-
Screws.
Note: The Stretcher bar is 5" shorter than the specified size.
For example, XP-SB-60 is actually 55" long.
XPand Reach- Double Station – Manager Station
Step 16: Assemble the XP-SB-Bracket to the Center
location of the Leg Rail using (2) XP-Screws. Make
sure the Top Face of the Bracket faces upwards.
See Figure A.
8