Table of Contents
Advertisement
Call Block
Call block
You can press the MCALL BLOCKN button in
the following situations to disconnect the
current call and add a phone number to the
call block list:
– when an incoming call is being received
– when an incoming call is being recorded by
the answering system
– when talking on an outside call
Once a phone number has been added to the
call block list, the unit will block calls from that
phone number in the future.
Handset / Base unit
1
Press MCALL BLOCKN under the
situations shown above.
2
Confirm the call block number and press
MYESN.
R The call block number is stored in the
call block list, "Caller blocked" is
displayed, and then the call is
disconnected.
Note:
R If the call has no phone number, the call is
blocked but it is not stored in the call block
list.
R The call block feature is not available:
– for intercom calls or calls received by call
waiting.
– when a landline call (or cellular call) is
being received during a cellular call (or
landline call).
R Blocked calls are logged in the caller list.
Storing unwanted callers
The unit can block calls by storing the desired
items in the call block list beforehand (Caller
ID subscribers only).
– "Block a single number"
*2
: The unit blocks calls from
a single #"
specific phone numbers stored in the call
block list.
– "Block range of numbers"
*2
: The unit blocks calls that
range of #"
begin with a number stored in the call block
For assistance, please visit http://shop.panasonic.com/support
34
list, such as a toll-free phone number prefix
or certain area codes.
– "Block unknown CID"
unknown"
have no phone number.
*1
Handset
*2
Base unit
Single phone numbers and ranges of numbers
can be stored in the call block list up to 250
items in total.
Blocking unwanted callers:
When a call is received, the unit rings once
while caller information is being received.
If the caller's phone number matches an entry
in the call block list, the unit emits no sound to
the caller, and disconnects the call.
*1
If you do not want this one ring to sound,
select "No" in "Turning the first ring on/
off" (page 36).
Storing a single phone number
Important:
R We recommend storing 10 digits (including
the area code). If only 7 digits are stored, all
numbers that have the same last 7 digits
will be blocked.
Adding call blocked numbers from
the caller list
Handset
n When a cellular phone is paired:
1
MCN CID
2
MbN: Select the desired entry to be
blocked.
R To edit the number:
*1
/"Block
3
MCALL BLOCKN
4
MbN: "Yes" a MSELECTN
*1
/"Block
5
Edit the phone number if necessary
(24 digits max.). a MSAVEN a MOFFN
*1
/"Block
*2
: The unit blocks calls that
MSELECTN a Press * (Edit)
repeatedly until the phone number
is shown in the 10-digit format. a
MSAVEN a MbN: "Call block"
a MSELECTN a Go to step 4.
*1
Advertisement
Table of Contents
Need help?
Do you have a question about the KX-TGF570 Series and is the answer not in the manual?
Questions and answers
How to unblock a blocked number
To unblock a blocked number on the Panasonic KX-TGF570 Series, follow these steps:
1. Press #173.
2. Select the blocked number you want to unblock.
3. Confirm the action to unblock the number.
This answer is automatically generated
How to unblock number
To unblock a number on the Panasonic KX-TGF570 Series, use the following steps:
1. Press #217 to access the call block menu.
2. Select the option to unblock a number.
3. Follow the on-screen prompts to remove the blocked number.
This answer is automatically generated
How to delete all blocked numbers
To delete all blocked numbers on the Panasonic KX-TGF570 Series:
### Using the Handset:
1. Press MCALL BLOCKN.
2. Use MbN to select "Erase all", then press MSELECTN.
3. Use MbN to select "Yes", then press MSELECTN again.
4. Confirm by selecting "Yes", then press MSELECTN.
5. Press MOFFN to exit.
### Using the Base Unit:
1. Press MCALL BLOCKN.
2. Use MbN to select "Erase all", then press MSELECTN.
3. Use MbN to select "Yes", then press MSELECTN.
4. Confirm by selecting "Yes", then press MSELECTN.
5. Press MEXITN to exit.
This answer is automatically generated
How do you get the voice mail meg via phone co off the phone?
To disable the voicemail message notification on a Panasonic KX-TGF570 Series phone, follow these steps:
1. Remove all messages from your voicemail box. Depending on your phone service provider, this may be necessary to clear the notification.
2. Alternatively, press and hold the # key on the handset until the unit beeps. This will manually remove the voicemail notification.
This answer is automatically generated
Turn off intercom
To turn off the intercom on the Panasonic KX-TGF570 Series, press the MOFFN button on the handset or the MEXITN button on the base unit.
This answer is automatically generated
Our telephone when receiving an incoming call goes directly to the answering machine, whether the answer but is on or off, please help
The Panasonic KX-TGF570 Series telephone may send incoming calls directly to the answering machine for the following reasons:
1. The answering system is turned on – The system is set to answer calls automatically.
2. The message memory is full – If the memory is full, it may not record new messages.
3. The recording time is set to “Greeting only” – This setting prevents message recording.
4. Voicemail service from the phone provider is active – The provider’s voicemail may answer calls before the unit’s system. Lowering the number of rings on the unit can help.
To resolve this, check the answering system settings and voicemail service configuration.
This answer is automatically generated
how do I unblock a number?
To unblock a number on the Panasonic KX-TGF570 Series, use the following steps:
1. Press #173 on the handset.
2. Select "Yes" to confirm unblocking the number.
This will remove the number from the blocked list.
This answer is automatically generated
How to set Call Forwarding remotely from different location to Cell Phone.
set the time
To set the time on the Panasonic KX-TGF570 Series:
1. Press the MENU button.
2. Select "Settings."
3. Choose "Set date & time."
4. Select "Date and time."
5. Enter the date and time using the keypad.
6. Press SAVE or OK to confirm.
You can also enable "Caller ID auto" time adjustment by selecting it in the settings under "Time adjustment" (#226).
This answer is automatically generated
set the time
To set the time on the Panasonic KX-TGF570 Series:
."
1. Press the Menu button.
2. Select "Settings."
3. Choose "Set date & time."
4. Enter the date and time using the keypad.
5. Press Save or OK to confirm.
Alternatively, the time can be set automatically through Caller ID by selecting "Time adjustment" and choosing "
This answer is automatically generated