Air bed
Bed Frame
Storage Case Panel
Hello!
Welcome to the Ivation™ family. This user manual helps you get to know your
new inflatable air bed a little better. For additional information and technical support,
please contact our helpful team at info@myivation.com.
Unzip storage case completely before
inflation, make sure panel of storage
case is laid flat on the floor, this will
prevent damage to bed frame and
ensure smooth extension out of its
storage case.
Do not place anything on top or around
bed during inflation cycle.
Please allow clear area of approximately
9ft in length and 7ft in width, for proper
inflation. (Clear space accordingly.)
120V AC
Plug pump into a polarized 120V AC outlet.
Outlet
Turn Comfort Adjust Dial to desired
firmness level.
Turn Inflate/Deflate Switch clockwise to
"Inflate" position to turn on Setup Pump
and inflate air bed.
Comfort Adjust Pump is a fully automatic pressure maintenance pump that is designed to operate silently so
that it will not disturb your sleep when it automatically turns on to re-inflate. Pump will automatically turn
on when air pressure inside air bed drops below a predetermined low pressure level. Pump will automatically
turn off upon reaching selected firmness level (firmness determined through adjusting the Comfort Adjust Dial).
To ensure that Comfort Adjust Pump
will operate, please make sure to plug
power cord into 120V AC electrical
wall socket.
120V AC Outlet
Clear area, bedding and any other articles
on top or around
Turn Comfort Adjust Dial to "Off"
position so Comfort Adjust Pump will not
automatically turn on.
Turn Inflate/Deflate Switch counter-
clockwise to "Deflate" position for
complete air removal.
Upon complete air removal, Setup
Pump will automatically turn off
and Inflate/Deflate Switch will
automatically return to "Off" position.
Place power cord into Cord Storage
Pocket for storage.
Weight Limit:
Cord Storage Pocket
Inflate/Deflate Switch
Comfort Adjust Dial
Setup Pump
Comfort Adjust Pump
Power Indicator
Instructions for
Instructions for
Comfort Adjust Pump Operations:
Instructions for
prior to deflation.
600 LBS for King Size / 450 LBS For Queen Size
400 LBS for Full Size / 300 LBS For Twin Size
Please see reverse side for more information
protective casing is not recommended for airline travel.
Distributed by C & A Marketing
114 Tived Lane East
Edison, NJ 08837 USA
info@myivation.com
Ivation
Ivation
Ivation
Ivation
Air inlet
This product may be covered under one or more of the following U.S. and / or
Setup Pump
foreign patents: U.S. Pat. Nos. : 2,425,162; 2,610,119; 2997858; 5,827,052;
6,004,116; 6,120,264; 6,332,760 B1; 6,457,192; 6,581,223; 6,679,686 B2;
6,722,306 B1; 6,754,925 B1; 6,754,926 B2; 6,763,540; 6,793,469;
6,990,700 B2; 7,020,921 B2; 7,040,347 B2; 7,114,207; 7,120,955; 7,152,265;
7,246,394; 7,306,694; 7,313,837; 7,334,274; 7,346,950 B2; 7,365,277;
7,387,920; 7,475,443; 7,497,416 B2; 7,597,123; 7,647,662; 7,739,760;
7,703,160; 7,739,763; 7,922,461 B2; 8,024,830 B2; 8,051,517; 8,151,390;
8,214,953; 8,549,686; 8,801,392; 8,863,771; 9,062,668 B2; 9,121,519 B2;
9,157,433; 9,989,979; RE42, 559 E; GB2378987; GB2396670;
CN 221,800; ZL01129383 Others U.S. and International Patents Pending
Setup Operations:
Airbed-frame will automatically
extend from its storage case.
Setup Pump will automatically turn off
upon reaching selected firmness level and
Inflate/Deflate Switch will automatically
return to "Off" position.
To turn off Comfort Adjust Pump
auto inflate function; turn Comfort
Adjust Dial to "Off" position.
Comfort Adjust Pump will not
automatically turn on regardless
of air pressure inside air bed.
Storage Operations:
Gently lift up Airbed frame by it's foot
end and push it back into its storage case.
Zip-up storage case for storage.
Handle and wheels are located on the
storage case for easy and convenient
transport.
Made in China
ivation & Deflate Defender
are the trademarks of
C&A IP Holdings, LLC
©2016 All right reserved
with Deflate Defender
Technology King Size
TM
with Deflate Defender
Technology Queen Size
TM
with Deflate Defender
Technology Full Size
TM
with Deflate Defender
Technology Twin Size
TM
is ready for use.
Need help?
Do you have a question about the EZ BED Deflate Defender King and is the answer not in the manual?
Questions and answers