Determining The Scanner's Ip Address; Disabling Wi-Fi Features; Restoring Default Network Settings - Epson DS-575W II User Manual

Determining the Scanner's IP Address

If you have multiple scanners on your network, you need to know the IP address of the scanner when
setting up network scanning.
1. Do one of the following to start EpsonNet Config:
• Windows 10: Click
• Windows 8.x: Navigate to the Apps screen and select EpsonNet Config.
• Windows (other versions): Click
EpsonNet > EpsonNet Config > EpsonNet Config.
• Mac: Open the Applications folder and select Epson Software > EpsonNet > EpsonNet Config
> EpsonNet Config.
2. Locate your scanner in the list and write down the IP address.
Parent topic:

Disabling Wi-Fi Features

You may need to disable your product's Wi-Fi features if you change your network connection type or
need to solve a problem with your network connection.
Note: Before disabling Wi-Fi features, make a note of your product's SSID (network name) and
password, and any network settings selected for Epson DocumentScan.
Press and hold the
features. When the
Parent topic:

Restoring Default Network Settings

If you need to solve a problem with your network connection, you can restore all network settings to their
defaults.
1. Turn off your scanner.
2. Press and hold the
lights turn on. Then release the buttons.
3. Wait until the
The default network settings are restored.
> EpsonNet > EpsonNet Config.
Setting Up Network Scanning
Wi-Fi button on the scanner for at least three seconds to disable the Wi-Fi
Wi-Fi light and the
Wi-Fi Networking
Wi-Fi button and the
Wi-Fi and AP mode lights flash alternately and then turn off.
or Start, and select All Programs or Programs. Select
AP mode light turn off, Wi-Fi is disabled.
power button until the
57
Wi-Fi and AP mode